Abstract:The colorless, transparent, and recyclable thermoset PCU fabricated in this work exhibits excellent mechanics with tensile strength of 59.2 ± 3.7 MPa, and shows solid‐state plasticity and good shape memory performance, with shape fixity and recovery ratios above 90%. The PCU can achieve arbitrary shape manipulations by the combination of solid‐state plasticity and shape memory property. The traditional thermoset polyurethanes (PUs) can be recycled through the dynamic carbamate bonds under specific conditions. However, there is limited research on the structural evolution and property changes of these PUs before and after recycling. Herein, we designed and fabricated a thermoset polyurethane network (PCU) using polyhexamethylene carbonate diol (PHMC‐diol) as soft segments, and isophorone diisocyanate (IPDI) and glycerol (GLY) as hard segments. Through careful formulation design, the PCU demonstrated colorless transparency (with up to 86% transmission), shape memory properties, and reprocessing capabilities, all achieved without introducing other dynamic covalent bonds. Furthermore, the PCU exhibited excellent mechanical properties, boasting a tensile strength of 59.2 ± 3.7 MPa and the elongation at break of 674.8 ± 37.3%. Of particular interest, the PCU samples displayed solid‐state plasticity and impressive shape memory performance, with shape fixity and recovery ratios exceeding 90%. Leveraging the combination of solid‐state plasticity and shape memory, the PCU samples demonstrated the ability to achieve arbitrary shape manipulations. Upon recycling, it was observed that the cross‐linking density of the PCU samples decreased, resulting in the formation of byproducts and subsequently leading to a reduction in tensile strength. Nonetheless, the PCU samples prepared in this study exhibit potential as thermadapt shape memory and recyclable materials.

Malleable and thermally recyclable polyurethane foam

Reprocessable Polyurethane Foams Using Acetoacetyl-Formed Amides

Foam‐to‐Foam Recycling Potential of PU‐Foams by Integration of Amino Esters

A “Plasticizing-Foaming-Reinforcing” approach for creating thermally insulating PVC/polyurea blend foams with shape memory function

Mechanochemical Recycling of Flexible Polyurethane Foam Scraps for Quantitative Replacement of Polyol Using Wedge-Block-Reinforced Extruder

Reprocessing Postconsumer Polyurethane Foam Using Carbamate Exchange Catalysis and Twin-Screw Extrusion

Biobased, reprocessable, self-blown non-isocyanate polyurethane foams: Influence of blowing agent structure and functionality

Multimethod Recyclable Thermoset Polybutadiene Polyurethane–Urea Via Reversible Disulfide Bonds

Reinforcing mechanically reclaimed polyurethane foam wastes‐based elastomer with modified recycled polyester fibers

Renewable and Biodegradable Polyurethane Foams with Aliphatic Diisocyanates

Colorless, transparent, and shape memory polyurethane networks with high strength and recyclability

Chemical upcycling of commodity thermoset polyurethane foams towards high-performance 3D photo-printing resins

Upcycling of waste epoxy thermosets to robust polyurethane foams via an in situ degradation-foaming process

Preparation and properties of novel poly(propylene oxide)-block- polylactide-based polyurethane foams

Recycling of Flexible Polyurethane Foams by Regrinding Scraps into Powder to Replace Polyol for Re-Foaming

Biobased Ultralow-Density Polyurethane Foams with Enhanced Recyclability

Polyurethane Foam Chemical Recycling: Fast Acidolysis with Maleic Acid and Full Recovery of Polyol

A novel semi-continuous preparation mode of ultra-low density thermoplastic polyurethane foam

Pulverized Polyurethane Foam Particles Reinforced Rigid Polyurethane Foam And Phenolic Foam

Self-evolutionary recycling of flame-retardant polyurethane foam enabled by controllable catalytic cleavage

Combination of Dynamic and Coordination Chemistry Achieving Two-Method Recycling of Polyurethane