Abstract:The integration of a composite of porous medium with phase change material (PCM) offers significant advantages in thermal management systems, enhancing heat transfer efficiency and addressing various thermal regulation challenges. This approach utilizes the PCM's latent heat absorption and the enhanced thermal conductivity provided by the porous medium, resulting in optimized system performance. Its applicability spans across electronics cooling and building insulation systems. However, predicting the thermal behavior of this composite material is challenging, necessitating computational tools to anticipate its response under different conditions and evaluate its influence on cooling strategies. The objective of this study is to create a computational tool specifically tailored to evaluate constitutive parameters of this composite material, thereby providing a comprehensive description of its thermal behavior. To achieve this goal, the multiscale homogenization principle is employed to assess the composite's effective thermophysical material properties using the representative volume element approach. The repeating unit cell of the aluminum lattice is incorporated into the PCM to define a representative volume element. The finite element method (FEM) is utilized to solve the three-dimensional homogenization problem, yielding an orthotropic effective thermal conductivity due to the inherent symmetry of the repeating material cell. Moreover, the study leverages the apparent heat capacity method to effectively manage the phase transitions within the PCM domain, utilizing smooth and temperature-dependent functions to accurately describe the thermophysical properties of the PCM. Integrating the composite into battery pack thermal management, this study thoroughly examines thermal dynamics by comparing outcomes with and without PCM integration. The transient thermal problem is accurately tackled using the FEM, employing the evaluated effective constitutive parameters of the homogenized composite to minimize computational effort. The results indicate a notable decline in the highest temperatures of the battery pack, leading to a reduction of about 14 °C at the specific moment when the phase change material fully transitions into its liquid form. The obtained results emphasize the effectiveness and practical feasibility of the proposed thermal management strategy. The modeling approach presented provides a robust tool with significant efficiency in reducing computational time for analyzing the thermal behavior of large models, as the utilization of the homogenization technique notably decreases the computational time.

Combining an active method and a passive method in cooling lithium-ion batteries and using the generated heat in heating a residential unit

A parametric study on thermal management of an air-cooled lithium-ion battery module for plug-in hybrid electric vehicles

Air and PCM cooling for battery thermal management considering battery cycle life

Experimental and Numerical Study of PCM Thermophysical Parameters on Lithium-Ion Battery Thermal Management

Electrochemical–Thermal Evaluation of an Integrated Thermal Management System for Lithium‐Ion Battery Modules

Simultaneous cooling of plate and cylindrical batteries in an air-cooled lithium battery thermal management system, by changing the distances of the batteries from each other and the pack wall

Numerical Investigation of the Thermal Performance of a Hybrid Phase Change Material and Forced Air Cooling System for a Three-Cell Lithium-Ion Battery Module

Hybrid cooling-based lithium-ion battery thermal management for electric vehicles

Thermal modeling of porous medium integrated in PCM and its application in passive thermal management of electric vehicle battery pack

Computational study on hybrid air-PCM cooling inside lithium-ion battery packs with varying number of cells

Thermal performance of a hybrid thermal management system that couples PCM/copper foam composite with air-jet and liquid cooling

Experimental and Numerical Analysis of a Hybrid Thermal Management Concept at Different Discharge Rates for a Cylindrical Li-Ion Battery Module

Effects of control volume outlet variation on axial air cooling of lithium-ion batteries

Simultaneous numerical investigation of the passive use of phase-change materials and the active use of a nanofluid inside a rectangular duct in the thermal management of lithium-ion batteries

Thermal management of a LiFePO4 battery pack at high temperature environment using a composite of phase change materials and aluminum wire mesh plates

Enhancing thermal management in cylindrical Li-ion battery through PCM integration with variable contact area

Numerical study of combined air and phase change cooling for lithium-ion battery during dynamic cycles

Thermal management of lithium-ion batteries based on the coupling of liquid cooling and composite phase change materials

Thermal management of cylindrical battery pack based on a combination of silica gel composite phase change material and copper tube liquid cooling

Improving the Cooling Performance of Cylindrical Lithium-Ion Battery Using Three Passive Methods in a Battery Thermal Management System

Experimental study on the thermal management performance of lithium-ion battery with PCM combined with 3-D finned tube