Abstract:One-dimensional sweat-activated batteries (SABs) provide a practical solution to generating electricity for textile electronics due to their excellent flexibility, biocompatibility, and compatibility with conventional textile techniques. However, the low power outputs and slow, inefficient activation during the initial perspiration stage greatly hamper their applications in textile-based, self-powered sensing systems. To address this issue, we developed a core-sheath-structured sweat-activated yarn battery (SAYB) with a Zn-wire core, a cotton-yarn sheath, and an outermost carbon yarn that served as the anode, sweat-wicking separator, and cathode, respectively. The battery has a power density of 1.72 mW cm −2 and an energy capacity of 15.3 mAh, which are much greater than those of the previously reported cotton-yarn-based SAB. The SAYB could be activated by only 1 μL of 100 mM NaCl solution within 3 s, thanks to the thin, hydrophilic cotton sheath, which may shorten the distance and accelerate liquid penetration between the electrodes. The batteries could tolerate 10,000 cycles of bending, 2800 cycles of twisting, and 20 cycles of washing without significantly reducing their power outputs. Multiple batteries connected in proper configurations could power headlights or charge portable gadgets like a smart watch and a smart phone. The SAYB was produced on a large scale (60 m long) to create a sweat-activated energy fabric (5 m long and 0.5 m wide) using conventional weaving techniques. The fabric was further combined with mini wireless analyzers and strain-sensing yarns to prepare a self-powered sensing T-shirt. The T-shirt can be triggered to wirelessly monitor the arm swing frequency and breathing rate in real time after wicking up the sweat created by a volunteer while he is jogging. The SAYBs are expected to contribute to the production of self-powered smart garments for wearable healthcare and exercise monitoring as reliable one-dimensional power sources.

Garment embedded sweat-activated batteries in wearable electronics for continuous sweat monitoring

Stretchable Sweat‐Activated Battery in Skin‐Integrated Electronics for Continuous Wireless Sweat Monitoring

Battery‐Free and Wireless Epidermal Electrochemical System with All‐Printed Stretchable Electrode Array for Multiplexed in Situ Sweat Analysis

Body Heat Powered Wirelessly Wearable System for Real‐time Physiological and Biochemical Monitoring

Bandage based energy generators activated by sweat in wireless skin electronics for continuous physiological monitoring

A Smartwatch Integrated with a Paper‐based Microfluidic Patch for Sweat Electrolytes Monitoring

Epidermal Self-Powered Sweat Sensors for Glucose and Lactate Monitoring

A Soft, Wearable Microfluidic Device for the Capture, Storage, and Colorimetric Sensing of Sweat.

Triboelectric Nanogenerator Enabled Sweat Extraction and Power Activation for Sweat Monitoring

Ultra-Small Wearable Flexible Biosensor for Continuous Sweat Analysis.

A Self‐Powered Wearable Sensor for Continuous Wireless Sweat Monitoring

Screen Printing and Laser-Induced Flexible Sensors for the Simultaneous Sensitive Detection of Uric Acid, Tyrosine, and Ascorbic Acid in Sweat.

Bio-inspired ultra-thin microfluidics for soft sweat-activated batteries and skin electronics

Scalable, high-performance, yarn-shaped batteries activated by an ultralow volume of sweat for self-powered sensing textiles

Intelligent Soft Sweat Sensors for the Simultaneous Healthcare Monitoring and Safety Warning

A Fully Elastic Wearable Electrochemical Sweat Detection System of Tree‐Bionic Microfluidic Structure for Real‐Time Monitoring

Human joint enabled flexible self-sustainable sweat sensors

Wearable and flexible electrochemical sensors for sweat analysis: a review

A wearable microfluidic system for efficient sweat collection and real-time detection

Sweat sensing at your fingertips

Innovative Material-Based Wearable Non-Invasive Electrochemical Sweat Sensors towards Biomedical Applications