Abstract:To investigate the fracture evolution and failure behavior around an opening in brittle jointed rocks, an experimental study was carried out in which cross-jointed samples with granite cavities were uniaxially loaded while the mechanics, acoustics and optics were simultaneously observed. These results were compared and analyzed to better understand the deformation and cracking process. The results show that the presence of cross joints and the change in included angles play a crucial role in influencing the strength and deformation properties of the samples. The peak strength and elastic modulus depend on the included angle and first decrease and then increase with increasing included angle, reaching the minimum values when β equals 45°. A stress fluctuation point generally corresponds to a large acoustic emission (AE) event and a turning point in the accumulated AE count curve. The good correlation of the three observations provided a reasonable holistic picture of the process zone nucleation and the subsequent cracking processes. The cracking behavior around openings and cross joints is significantly affected by the included angle because of drastic changes in the stress distribution surrounding the defects. The highlighted strain localization zones formed near the joint tip and around the chamber interact with each other and jointly dominate the initiation and propagation mode of new cracks, eventually leading to more complex failure patterns and severe fracture degrees. Moreover, there will also be an interaction between the same set of cross joints, and the tips can be connected, showing the characteristics of intensified deformation in local areas. The unstable failure of a sample is primarily dominated by tensile cracks and locally by shear cracks around the cavern and the joint tips. Microcrack zones are regarded as white patches macroscopically, and microcrack nucleation is considered to be the microformation mechanism of a white patch.

Fracture mechanisms of intact rock-like materials under compression

Fracture and Damage Evolution of Multiple-Fractured Rock-like Material Subjected to Compression

Experimental and numerical study on crack propagation and coalescence in rock-like materials under compression

Internal Stress Distribution and Cracking Around Flaws and Openings of Rock Block under Uniaxial Compression: A Particle Mechanics Approach

Fracture evolution and failure behavior around an opening in brittle jointed rocks subjected to uniaxial compression

Study on multi-scale damage and failure mechanism of rock fracture penetration: experimental and numerical analysis

Crack propagation mechanism in rock-like specimens containing intermittent flaws under shear loading

Multiscale fracture characteristics and failure mechanism quantification method of cracked rock under true triaxial compression

Research on crack initiation mechanism and fracture criterion of rock-type materials under compression–shear stress

Fracture characterization of fractured rock bodies based on acoustic and optical characteristics

Robustness of Rock Damage Regions Induced by Crack Nucleation

Investigation of Microcrack Propagation and Energy Evolution in Brittle Rocks Based on the Voronoi Model

Dynamic Cracking Process of Rock Interpreted by Localized Strain-Rate, Rate-Dependent Strength Field and Transition Strain-Rate

Experimental and Theoretical Study on Crack Growth Using Rock-Like Resin Samples Containing Inherent Fissures and its Numerical Assessment

Study on crack initiation mechanism of brittle rock under pressure head

A synthetic study of cracking behavior and fracture mechanism of sandstone containing two non-connected fissures under uniaxial compression

Mechanical properties and damage evolution characteristics of composite rock mass with prefabricated fractures

Cracking Evolution and Failure Mechanism of Brittle Rocks Containing Pre-Existing Flaws under Compression-Dominating Stresses: Insight from Numerical Approach

Study on the evolution law and quantitative characterization of micro-crack propagation in the compressive failure process of rocks

A Micromechanics-Based Model of Direct Tensile Fracture in Brittle Rocks under Confining Pressure

Fracture mechanics behaviors of fissured rock under dynamic loading: a review