Abstract:This study investigates the alternative of replacing noble metals by base metals as catalysts for selective hydrogenation of polyunsaturated hydrocarbons. Nickel catalysts are active for this type of reaction, but poorly selective. However, former calculations anticipated that Ni–Zn alloys could have higher selectivity to alkenes than monometallic Ni depending on the Ni/Zn atomic ratio in the alloy. In this contribution, Ni–Zn alloy nanoparticles supported on TiO2 are synthesized as catalysts for selective hydrogenation of acetylene and butadiene. The designed catalysts with 0.5 wt% Ni loading and various Ni/Zn nominal ratios are prepared by deposition–precipitation with urea (DPU). STEM-HAADF imaging coupled with EDS analysis reveals that Ni–Zn bimetallic particles are formed after reduction treatment at 450 °C. Alloying Ni with Zn leads to a slight increase in the average particle size and a broadening of the size distribution compared to monometallic Ni. However, the average Ni/Zn atomic ratio measured by EDS in the bimetallic particles is always higher than the nominal one, which could be due to Zn evaporation under the beam. The results of acetylene hydrogenation show that although the catalytic activity is slightly reduced after alloying Ni with Zn, the selectivity to ethylene is enhanced from 50% up to 85%, at the expense of the formation of oligomers (coupling products). However, the bimetallic Ni–Zn catalysts suffer from progressive deactivation in this reaction. During butadiene hydrogenation performed in the presence of an excess of propene, the bimetallic Ni–Zn/TiO2 catalysts are significantly more stable, with a high and constant selectivity to butenes (> 95%), compared with Ni/TiO2, which deactivates rapidly in the first hours. Some hypotheses concerning the observed differences in catalytic stability are discussed.

Comparative Study of Pd–Ni Bimetallic Catalysts Supported on UiO-66 and UiO-66-NH2 in Selective 1,3-Butadiene Hydrogenation

Design Strategies and Structure-Performance Relationships of Heterogeneous Catalysts for Selective Hydrogenation of 1,3-Butadiene

Ligand-controlled Fabrication of Core-Shell PdNi Bimetallic Nanoparticles As a Highly Efficient Hydrogenation Catalyst

Highly selective hydrogenation of 3,4-dichloronitrobenzene over Pd/C catalysts without inhibitors

Theoretical study the influence of partial substitute noble metal Pd/Ag of PdAg-based catalyst by non-noble metal Ni/Cu for 1,3-Butadiene hydrogenation

Multifunctional Pd@UiO-66 Catalysts for Continuous Catalytic Upgrading of Ethanol to n-Butanol

UV Light-Assisted Synthesis of Highly Efficient Pd-Based Catalyst over NiO for Hydrogenation of o-Chloronitrobenzene

Effect of Oxide Supports in Stabilizing Desirable Pt-Ni Bimetallic Structures for Hydrogenation and Reforming Reactions

Promotional effects of Nb 2 O 5 on ceria doped Ni catalysts for selective hydrogenation of 1,3-butadiene to butenes: Combined experimental and DFT approach

Enhanced catalytic performance of Pd-Pt bimetallic alloy nanocatalyst for hydrogenation of nitrile butadiene rubber

Bimetallic Synergy Effects of Phyllosilicate-Derived NiCu@SiO2 Catalysts for 1,4-Butynediol Direct Hydrogenation to 1,4-Butanediol

Investigation of Ni-Cu-acid multifunctional synergism in NiCu-phyllosilicate catalysts toward 1,4-butynediol hydrogenation to 1,4-butanediol

Bimetallic Ni–Zn/TiO2 catalysts for selective hydrogenation of alkyne and alkadiene impurities from alkenes stream

Understanding the Underlying Mechanism of Improved Selectivity in Pd1 Single-Atom Catalyzed Hydrogenation Reaction

Selection of Oxide Supports to Anchor Desirable Bimetallic Structures for Ethanol Reforming and 1,3-Butadiene Hydrogenation

Palladium particles catalyzed selective butadiene hydrogenation: Effect of covalent organic framework modification

Unprecedented selectivity behavior in the direct dehydrogenation of n-butane to n-butenes with similar active Pt nanoparticle size: unveiling structural and electronic characteristics of supported monometallic catalysts

Differentiation of Pt−Fe and Pt−Ni 3 Surface Catalytic Mechanisms towards Contrasting Products in Chemoselective Hydrogenation of α,β‐Unsaturated Aldehydes

Effect of Oxide Support Surface Area on Hydrogenation Activity: Pt/Ni Bimetallic Catalysts Supported on Low and High Surface Area Al2o3 and Zro2

Coating Pd/Al 2 O 3 Catalysts with FeO X Enhances Both Activity and Selectivity in 1,3-Butadiene Hydrogenation

Pd–Ni–Fe Nanoparticles Supported on UiO-66 for Selective Hydrogenation of Fatty Acid Methyl Esters to Alcohols