Abstract:Abstract The aerodynamic performance of conventional aircraft configurations are mainly affected by the wing and horizontal tail. Drag reduction by shape optimisation of the wing, while taking into account the aircraft trimmed constraint, has more benefit than focusing solely on the wing. So in order to evaluate this approach, the following study presents results of a single and multipoint aerodynamic shape optimisation of the wing-body-tail configuration, defined by the Aerodynamic Design Discussion Group (ADODG). Most of the aerodynamic shape optimisation problems published in the last years are focused mainly on the wing as the main driver for performance improvement, with no trim constraint and/or excess drag obtained from the fuselage, fins or other parts. This work partially fills this gap by an investigation of RANS-based aerodynamic optimisation for transonic trimmed flight. Mesh warping and geometry parametrisation is accomplished by fitting the multi-block structured grid to a B-spline volumes and performing the mesh movement by using surface control points embedded within the free-form deformation (FFD) volumes. A gradient-based optimisation algorithm is used with an adjoint method in order to compute the derivatives of the objective and constraint functions with respect to the design variables. In this work the aerodynamic shape optimisation of the CRM wing-body-tail configuration is investigated, including a trim constraint that is satisfied by rotating the horizontal tail. The shape optimisation is driven by 432 design variables that envelope the wing surface, and 120 shape variables for the tail, as well as the angle of attack and tail rotation angles. The constraints are the lift coefficient, wing’s thickness controlled by 1,000 control points, and the wing’s volume. For the untrimmed configuration the drag coefficient is reduced by 5.76%. Optimising the wing with a trim condition by tail rotation results in shock-free design with a considerably improved drag, even better than the untrimmed-optimised case. The second optimisation problem studied is a single and multi-point lift constraint drag minimisation of a gliding configuration wing in transonic viscous flow. The shock is eliminated, reducing the drag of the untrimmed configuration by more than 60%, using 192 design variables. Further robustness is achieved through a multi-point optimisation with more than 45% drag reduction.

Aerodynamic performance of an OPTIMIST full-scale sail for various sail trims: An experimental study

Boat Trial Validation and Resistance Prediction of a 36-Foot Hydrofoil Catamarans Using CFD

Numerical simulation of windsurfing sail aerodynamics: Insights into forces and flow characteristics

Experimental Study of Two-Stage Savonius Rotors with Different Gap Ratios and Phase Shift Angles

Numerical investigation of wind-lens combinations for improving aerodynamic performance of an elliptical-bladed Savonius wind turbine

Analysis of Dynamic Characteristics of Rotor Sail Using a 4DOF Rotor Model and Finite Element Model

Aerodynamic Performance and Numerical Validation Study of a Scaled-Down and Full-Scale Wind Turbine Models

Fluid Dynamic Simulation of Sail Design Performance on Sail-Assisted Ship; A Preliminary Study

Hybrid Aerodynamic Optimization of a Propeller Based on the Reformulated Blade Element Momentum Theory

A simplified method for the evaluation of the total resistance of a foiling yacht in upright condition

Effect of chord length ratio on aerodynamic performance of two-element wing sail

Adjoint-based aerodynamic drag minimisation with trim penalty

RANSE simulations for unmanned sailboat performance prediction: Coupling aerodynamics and hydrodynamics in self-sailing

Wing Sails: Numerical Analysis of High-Performance Propulsion Systems for a Racing Yacht

3D CFD study of a DeepWind demonstrator at design, off-design and tilted operating conditions

Thrust vectoring of an electric solar wind sail with a realistic sail shape

Experimental Study on a High-Speed Trimaran-Planing Boat

Study of the Hydrodynamic Behavior of Horizontal Axis Tidal Turbines Based on the Blade Element Momentum Theory and Numerical Simulations

Numerical investigation of angle parameters of tip sails for improvement of aircraft flight performance

Experimental and numerical investigation on a trimaran airwake, geometry modification

Wingsail performance in unsteady atmospheric surface layer winds