Analysis of Dynamic Characteristics of Rotor Sail Using a 4DOF Rotor Model and Finite Element Model

Dong Min Kim,Soon Ho Hong,Se Hyeon Jeong,Sun Je Kim
DOI: https://doi.org/10.3390/jmse12020335
IF: 2.744
2024-02-16
Journal of Marine Science and Engineering
Abstract:The interest in wind-assisted ship propulsions (WASPs) is increasing to improve fuel efficiency and to reduce greenhouse gas emissions in ships. A rotor sail, one of the typical WASPs, can provide auxiliary propulsive force by rotating a cylinder-shaped structure based on the Magnus effect. However, due to its huge rotating structure, a meticulous evaluation of the influence on the ship structure and dynamical stability of the rotating structure should be conducted in the design stage. In this respect, an analysis of the rotating structure for a 30 m height and 3 m diameter rotor sail was conducted in this study. First, a 4DOF (four-degree-of-freedom) model was derived to simplify the dynamics of the rotor sail. Using the 4DOF model, natural frequencies for four low-order modes of the rotor sail were calculated, and frequency responses at support points were predicted. Next, a comparison and validation with the finite element model of the rotor sail were carried out. For the 1st and 2nd natural frequencies, a difference of approximately 0.3 Hz was observed between the 4DOF model and the finite element model, confirming the effectiveness of the 4DOF model for low-order modes. In analysis with changes in the bearing supporting stiffnesses, it was verified that lower support bearings have a significant impact on rotor dynamics compared to upper support bearings. Vibration response at the upper support was also confirmed through frequency response analysis caused by imbalance at Thom disk and mid-plate. Additionally, when estimating the eccentricity of the Thom disk as imbalance, a limit of eccentricity error could be set as 24 mm. The presented modeling procedures and analysis results can be references during early design stage of a novel rotor sail structure.
oceanography,engineering, marine, ocean
What problem does this paper attempt to address?
The paper primarily focuses on the dynamic characteristics analysis of the Rotor Sail in Wind-Assisted Ship Propulsion (WASP) systems. As a technology that utilizes the Magnus effect to generate auxiliary thrust, the Rotor Sail can improve fuel efficiency and reduce greenhouse gas emissions for ships. However, due to its large rotating structure, the impact on the ship's structure and its own dynamic stability need to be meticulously evaluated during the design phase. The core research content of the paper includes: 1. **Comparison of Simplified Model and Finite Element Model**: To quickly analyze the dynamic response of the Rotor Sail, the researchers proposed a four-degree-of-freedom (4DOF) model and compared it with the finite element model for validation. The 4DOF model is used to calculate the natural frequencies of low-order modes and predict the frequency response at support points. The results show that for the first and second natural frequencies, the difference between the 4DOF model and the finite element model is about 0.3 Hz, demonstrating the effectiveness of the 4DOF model in analyzing low-order modes. 2. **Impact of Support Stiffness**: The study also analyzed the impact of varying support stiffness on rotor dynamics, finding that the lower support bearing has a more significant effect on rotor dynamics compared to the upper support bearing. 3. **Vibration Response under Imbalance Conditions**: Through frequency response analysis under imbalance conditions, the vibration response caused by the imbalance of the Thom disk and mid-plate was confirmed. The study determined that the eccentricity error limit for the Thom disk is 24 millimeters. 4. **Evaluation of Dynamic Characteristics**: The above analyses provide guiding principles for the design of Rotor Sails regarding dynamic response characteristics, especially in the early design stages. In summary, this paper aims to provide an analytical method to identify potential issues when applying Rotor Sails in practice and to offer reference points for structural design and performance optimization from the perspective of dynamic response. This fills a gap in the existing literature on the dynamic response analysis of Rotor Sails, showcasing a certain degree of innovation and practicality.