Multibody Analysis of Wave Energy Converters and a Floating Platform in the Time Domain

Dongeun Kim,Yoon Hyeok Bae

DOI: https://doi.org/10.3390/jmse12020265

IF: 2.744

2024-02-02

Journal of Marine Science and Engineering

Abstract:Generally, new and renewable energy systems generate electricity by installing and operating multiple modules simultaneously. In the Republic of Korea, recent studies and developments have focused on asymmetric wave energy converters (hereafter referred to as rotors) suitable for marine environments off the western coast of Jeju. These rotors are arranged on a large floating truss-structure platform and designed to harness electricity from the rotors' pitch motion. However, when multiple rotors operate on a platform, their behavior diverges from that of a single module due to hydrodynamic interactions between them. Moreover, because the rotors are connected to the floating platform, their motion is influenced by the platform's dynamics. In this study, a time-domain multibody motion equation was established to analyze changes in the behavioral characteristics of the rotors, both with and without a floating platform. The hydrostatic and hydrodynamic coefficients were derived in the frequency domain using WAMIT, a commercial code based on linear potential flow theory for three-dimensional diffraction/radiation analyses. The motion equation was then applied under regular and irregular wave conditions using OrcaFlex version 11.3, a marine systems design and analysis program. The resulting behaviors were compared to elucidate the influence of the platform and hydrodynamic interactions on the rotors' performance.

oceanography,engineering, marine, ocean

What problem does this paper attempt to address?

The problems that this paper attempts to solve are: when multiple wave energy converters (WECs) are installed on the same floating platform, how the hydrodynamic interactions between them affect the behavioral characteristics of each WEC, and how these behavioral characteristics differ from those of a single WEC. Specifically, the research aims to analyze the changes in the motion responses of multiple Salter's duck rotors connected to a floating platform in the time domain by establishing multi - body equations of motion, with particular attention to the influence of the floating platform on the rotor performance.

### Research Background
1. **Development of Wave Energy Converters (WECs)**:
- New energy systems usually generate electricity by simultaneously installing and operating multiple modules.
- Research and development in South Korea focuses on asymmetric wave energy converters (called rotors) suitable for the marine environment on the west coast of Jeju.
- These rotors are installed on a large floating truss - structure platform, which is designed to generate electricity through the pitching motion of the rotors.

2. **Challenges of Multi - Rotor Systems**:
- When multiple rotors operate on the same platform, their behavior is different from that of a single module due to hydrodynamic interactions.
- The rotors are connected to the floating platform, so their motion is affected by the platform dynamics.

### Research Objectives
- **Establish Multi - Body Equations of Motion**: Establish multi - body equations of motion in the time domain to analyze the changes in the behavioral characteristics of the rotors when they are connected and not connected to the floating platform.
- **Analyze Hydrodynamic Coefficients**: Use WAMIT software to derive hydrostatic and hydrodynamic coefficients in the frequency domain.
- **Simulate and Compare**: Use OrcaFlex software to conduct simulations under regular and irregular wave conditions, and compare the results to clarify the influence of the platform and hydrodynamic interactions on the rotor performance.

### Main Contributions
- **Multi - Degree - of - Freedom Analysis**: Unlike most previous studies that only consider a single degree of freedom of the rotor, this study incorporates the sway and heave effects interacting with the floating platform.
- **Numerical Model Development**: Develop a numerical model that includes the hydrodynamic interaction effects between the rotor and the platform and follows necessary constraints, such as connectivity.
- **Practical Application Evaluation**: Through regular and irregular wave simulations, calculate the motion responses and extract power, and finally compare the results with those of the rotors connected to a fixed rotation axis to evaluate the power generation performance of the actual wave energy structure in the waves.

### Formulas and Methods
- **Multi - Body Equations of Motion**:
\[
[M]\ddot{\xi} + [L_{rd}(\dot{\xi})] + [B_{vis} + B_{pto}]\dot{\xi} + [K_{res} + K_m]\xi = \{L_w\}
\]
- \( [M] \): Mass matrix, including inertial mass and added mass.
- \( [L_{rd}(\dot{\xi})] \): Radiation damping load, calculated using the retardation function matrix \( B \).
- \( [B_{vis} + B_{pto}] \): Viscous damping and PTO damping matrix.
- \( [K_{res} + K_m] \): Restoring load coefficient matrix, including the restoring loads of the floating bodies (platform and rotor) and the restoring loads caused by the mooring lines.
- \( \{L_w\} \): Wave excitation load.
- \( \xi \): Displacement or angular displacement.
- \( \dot{\xi} \): Velocity or angular velocity.
- \( \ddot{\xi} \): Acceleration or angular acceleration.

- **Restoring Load Coefficient**:
\[
B_{vis,ii} = 2\kappa_i \cdot (M_{iner,ii} + A_{ii}(\omega_0,i)) \cdot \omega_0,i - b_{rad,ii}(\omega_0,i)
\]
- \( \kappa_i \): Damping ratio.
- \( M_{iner,ii} \): Mass or mass moment.
- \( A_{ii}(\omega_0,i) \): Added mass at the undamped natural frequency.
- \( b_{rad,ii}(\omega_0,i) \)