Abstract:Electrode design and fabrication are of major importance for hydrogen evolution reaction applications, as far as high-efficiency and low-cost production of hydrogen are concerned. This paper reports on a titanium-nitride-ceramic-membrane electrode modified by MoS2 nanoflakes. Porous TiN-ceramic membranes were fabricated by phase-inversion tape-casting, followed by pressureless sintering. The as-prepared TiN membranes contained straight finger-like pores with an average diameter of 80 μm and smaller pores with an average diameter of 1–3 μm. Then, MoS2 nanoflakes were perpendicularly, densely, and uniformly grown on the surface of the TiN grains through the one-pot hydrothermal method. The optimized MoS2/TiN membrane electrode displayed a low overpotential of 113 mV at 10 mA cm–2, a Tafel slope of 78 mV dec–1, a small charge transfer resistance of 1.44 Ω, and a high double-layer capacitance of 504 mF cm–2. It also exhibited excellent stability with slight degradation after 80 h testing at an overpotential of 150 mV in 0.5 M H2SO4. The high conductivity of the TiN substrate, the similar chemical bonds, which favored the rapid electron transfer between MoS2 and TiN, the abundant exposed active sites of MoS2 nanoflakes, and the unique dual-pore structure resulted in the above superior electrocatalytic activity. The proposed successful utilization of conventional ceramic-membrane technology to prepare electrocatalysts based on membrane electrodes has potential for large-scale application in industrial hydrogen production.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00784?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00784</a>.Photographs of TiN green tapes and experimental device, SEM images of the finger-like layer and MoS2/TiN with various amounts of Mo and S precursors at the same ratio of Mo and S (1:4), XPS spectra of MoS2/TiN-1:2 and MoS2/TiN-1:8, cyclic voltammogram curves of pristine TiN, MoS2/TiN-1:2, MoS2/TiN-1:4, and MoS2/TiN-1:8, polarization curves of MoS2/TiN with various amounts of Mo and S precursors at the same ratio of Mo and S (1:4), comparison of electrocatalysts, and EIS data (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00784/suppl_file/ae1c00784_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Highly Efficient and Robust MoS 2 Nanoflake-Modified-TiN-Ceramic-Membrane Electrode for Electrocatalytic Hydrogen Evolution Reaction

Highly Efficient and Robust MoS2 Nanoflake-Modified-TiN-Ceramic-Membrane Electrode for Electrocatalytic Hydrogen Evolution Reaction

Self-Supported Ceramic Electrode of 1T-2H MoS 2 Grown on the TiC Membrane for Hydrogen Production

Self-Supported Ceramic Electrode of 1T-2H MoS2 Grown on the TiC Membrane for Hydrogen Production

Design of Dual-Modified MoS2 with Nanoporous Ni and Graphene as Efficient Catalysts for the Hydrogen Evolution Reaction

Tailored MXene Nanoarchitectonics: MXene with Mesoporous Nitrogen-Doped Carbon Confined Ultrafine Molybdenum Carbide Nanodots for Efficient Electrocatalytic Hydrogen Evolution

Ti@MoSx core-shell nanowire arrays as self-supported electrodes for hydrogen evolution reaction

Nanosponge-like Solid Solution of NiMo with a High Hydrogen Evolution Reaction Performance over a Wide Range of Current Densities

Porous TiN-based ceramic electrode with N -modified Co-based Nanorods/TiN heterointerfaces for efficient overall water splitting

Superior MoTiN and NiMoTiN coating electrode with platinum-like catalytic activity fabricated by plasma electrolytic oxidation

MOF-derived bimetallic NiMo-based sulfide electrocatalysts for efficient hydrogen evolution reaction in alkaline media

Heterostructured MoSe 2 /Oxygen-Terminated Ti 3 C 2 MXene Architectures for Efficient Electrocatalytic Hydrogen Evolution

Well-Defined Mo2C Nanoparticles Embedded in Porous N-Doped Carbon Matrix for Highly Efficient Electrocatalytic Hydrogen Evolution

Ni-CoS2@MoS2 hollow nanorod array in-situ synthesized on Ti foil as Pt-free self-supporting electrode for efficient wide-pH hydrogen evolution

Synthesis of P‐(NiCo)CO3/TiO2/Ti Self‐Supported Electrode with High Catalytic Activity and Stability for Hydrogen Evolution

Metal-organic framework derived Ni/Mo2C/Mo2TiC2Tx@NC as an efficient electrocatalyst for enhanced hydrogen production

Molybdenum Carbide MXene Embedded with Nickel Sulfide Clusters As an Efficient Electrocatalyst for Hydrogen Evolution Reaction

Hydrothermally Fabricated NiO@TiO 2 –Nanofiber Composite for Efficient Electrocatalytic Hydrogen Evolution Reaction

Bimetallic MOF-Templated Fabrication of Porous Zn, N Co-doped Mo 2 C for an Efficient Hydrogen Evolution Reaction

Mo 2 N–Ni/NF Heterostructure Boosts Electrocatalytic Hydrogen Evolution with Pt-Like Activity

Hybrid heterojunction of molybdenum disulfide/single cobalt atoms anchored nitrogen, sulfur-doped carbon nanotube/cobalt disulfide with multiple active sites for highly efficient hydrogen evolution