Abstract:The large-scale use of coal, oil, and natural gas will cause environmental pollution and resource shortages, which is incompatible with the sustainable development. Therefore, it is essential to the development of renewable energy. H-2 has a high heat of combustion, and it's combustion products do not include greenhouse gases. so it is considered as an ideal clean energy carrier. Industrial hydrogen production methods will bring CO2 inevitably. As an emerging energy conversion device, hydrogen produced by water splitting has simple equipment and little pollution, making it the first choice for clean energy in the future. Generally, the adsorption energy of hydrogen on the surface of precious metal catalysts is close to zero, and its hydrogen evolution reaction (HER) performance is the most prominent. Pt is an excellent HER catalyst. Commercial Pt/C has high alkaline HER performance, but its higher cost, material instability and resource scarcity limit its widespread applications. Therefore, this research is devoted to the development of high-activity, low-cost transition metal catalysts for HER by water splitting. Firstly, CoMoO4 nanorods were synthesized by hydrothermal method. Then, using the precursor morphology oriented strategy method, the activated Co9S8/MoS2 heterostructure catalyst was successfully prepared by sulfurating Co-MoO4 into CoS2/MoS2 and further, calcining CoS2/MoS2 nanorod in hydrogen atmosphere. X-rays diffraction (XRD), transmission electron microscopy (TEM), electron spin resonance (ESR), Raman spectra, X-ray photoelectron spectra (XPS) and synchrotron-based X-ray absorption fine structure (XAFS) characterizations exhibit that the Co coordination mode change from octahedron in CoS2 to tetrahedron in Co9S8, leading to the activation of inert basal plane in MoS2. Owing to this activation, the interlayer spacing of MoS2 is reduced and thus generate abundant defects. Meanwhile, the increased electrochemical surface area (ECSA) and roughness of the catalysts are more conducive to the adsorption of H*. The test of the contact angle data show that the electrode has good hydrophilicity, which can facilitate the penetration of electrolyte and diffusion of gas molecules quickly. When the current density is at 10 mA.cm(-2) in 1 KOH solution, an overpotential of 84 mV and a Tafel slope of 93 mV.dec(-1) can be achieved. Due to the strong interaction between different components of the heterostructures, the nanorods possess good structural stability in alkaline solutions. This work highlights the vital role of the sulfides heterostructure construction in HER, opening a new way to advanced alkaline HER catalysts.

Ni-CoS2@MoS2 hollow nanorod array in-situ synthesized on Ti foil as Pt-free self-supporting electrode for efficient wide-pH hydrogen evolution

Vertically oriented Ni-doped MoS2 nanosheets supported on hollow carbon microtubes for enhanced hydrogen evolution reaction and water splitting

Hybrid heterojunction of molybdenum disulfide/single cobalt atoms anchored nitrogen, sulfur-doped carbon nanotube/cobalt disulfide with multiple active sites for highly efficient hydrogen evolution

Mo 2 N–Ni/NF Heterostructure Boosts Electrocatalytic Hydrogen Evolution with Pt-Like Activity

Ti@MoSx core-shell nanowire arrays as self-supported electrodes for hydrogen evolution reaction

Synthesis of P‐(NiCo)CO3/TiO2/Ti Self‐Supported Electrode with High Catalytic Activity and Stability for Hydrogen Evolution

MOF-derived bimetallic NiMo-based sulfide electrocatalysts for efficient hydrogen evolution reaction in alkaline media

Molybdenum sulfide nanosheet arrays supported on Ti plate: an efficient hydrogen-evolving cathode over the whole pH range

Hierarchical Ni3S2@2D Co MOF Nanosheets As Efficient Hetero-Electrocatalyst for Hydrogen Evolution Reaction in Alkaline Solution

Surface Sulfided NiMoO4 Rod-Like Electrocatalysts for Efficient Hydrogen Evolution Reaction

Porous Ni−Mo−S Nanowire Network Film Electrode As a High‐Efficiency Bifunctional Electrocatalyst for Overall Water Splitting

In Situ Synthesis of Nanorod Arrays of Nickel–Molybdenum Nitrides as Stable Electrocatalysts for Hydrogen Evolution Reactions

Superb All‐pH Hydrogen Evolution Performances Powered by Ultralow Pt‐Decorated Hierarchical Ni‐Mo Porous Microcolumns

Sponge-like Nickel Phosphide–carbon Nanotube Hybrid Electrodes for Efficient Hydrogen Evolution over a Wide Ph Range

Construction of Co9S8/MoS2 Heterostructures for Enhancing Electrocatalytic Hydrogen Evolution Reaction

Hierarchical MoS2/Ni3S2 Core-Shell Nanofibers for Highly Efficient and Stable Overall-Water-splitting in Alkaline Media

MoS2 nanosheet-coated CoS2 nanowire arrays on carbon cloth as three-dimensional electrodes for efficient electrocatalytic hydrogen evolution

Pt Nanoparticles/mos2 Nanosheets/carbon Fibers As Efficient Catalyst for the Hydrogen Evolution Reaction

A self-standing nanoporous MoP2 nanosheet array: an advanced pH-universal catalytic electrode for the hydrogen evolution reaction

Three-dimensional Well-Mixed / Highly-Densed NiS-CoS Nanorod Arrays: an Efficient and Stable Bifunctional Electrocatalyst for Hydrogen and Oxygen Evolution Reactions

Nimo Solid Solution Nanowire Array Electrodes For Highly Efficient Hydrogen Evolution Reaction