Abstract:NHR200-II is a 200 MW nuclear heating reactor. The integrity of the fuel assembly should be ensured during the normal operations and design basis accidents. In the latter cases (e.g. earthquake), its deformation or damage should not prevent the insertion of control rods to shut down the reactor. Meanwhile, during the operating time, there are two aspects that attention should be paid, (i) the mechanical performance of internal core materials might be worsened by the increase of burnup and (ii) dynamic loads involving hydraulic erosion, flow-induced vibration might damage the assemblies. Therefore, the investigation of the dynamic characteristics of the fuel assembly with consideration of burnup effects is necessary. The fuel rod with pellets and cladding was approximated by the beam elements with a circular cross-section applied with calibrated material properties. Connector elements were used to replace the three-arc springs and dimples on the grid and thus simplify the geometry of the spacer grid. The agreements between the detailed and simplified models indicate the equivalence of these two methods. Then two simulations were performed to evaluate the dynamic characteristics of NHR200-II fuel assembly at the beginning of life. The modal simulation of the fuel bundle and channel suggests that the channel could be assumed stationary to the fuel bundle during the dynamic analysis. The seismic simulation conducted in the specific boundary conditions indicates that the integrity of spacer grids can be guaranteed and there was no buckling of the gird. No permanent deformation of the channel was observed, and its relative displacements were sufficiently small to ensure the insertion of control rods. Finally, burnup effects on the structural behavior of the fuel rod are discussed. The initial conditions of NHR200-II fuel assembly and its material properties at different burnup times are provided by referring to two irradiated tests. Various sensitivity analyses had been conducted to evaluate the effects of material properties and pellet-cladding interaction on the resulting failure limit and stiffness of the fuel rod.

Contact phenomena between load-bearing skeletons of bowed fuel assemblies in PWRs with mixed cores

Simulating Fuel Assembly Bowing: A Neutron-Diffusion Method Based on Arbitrary Quadrilateral Node and Conformal Mapping Technique

Nonlinear model for assessing seismic resilience in nuclear fuel assemblies

Theoretical Analysis for Coupled Thermal Deformation Behaviors of Subassemblies in a Single Row in Sodium-Cooled Fast Reactors

Multi-physical Fuel Performance Modeling of U-50Zr Helical Cruciform Fuel Based on Fluid-Thermal-structure Coupling Methodology

Simulation of Dynamic Characteristics of NHR200-II Fuel Assembly

Measurement Method for Deformation and Contact Force of the Fuel Assembly for China Fast Reactor under Thermal Gradient

An Investigation of the Stiffness Characteristics of a PWR Nuclear Fuel Spacer Grid by a 3D Shell Model

Multi-physics Coupling Behaviors on 3 × 3 Helical Cruciform Fuel Rods of U-50Zr Alloy under Normal and Accident Conditions

NUMERICAL AND EXPERIMENTAL INVESTIGATION ON CORE ASSEMBLY THERMAL-GRADIENT-INDUCED DEFORMATION OF SODIUM-COOLED FAST REACTOR

Thermal and Mechanics Analysis Code of the PWR Nuclear Fuel Performance Based on FEM

Numerical Investigation on Effects of Fuel Rod with Different Bow Deformation Ratio X on Two-Phase Boiling and Flow Performances of Coolant in Fuel Assembly

Numerical Simulation Research on Rolling Process of Monolithic Nuclear Fuel Plate

Impact of Nuclear Fuel Assembly Design on Grid-to-Rod Fretting Wear

Effects of displacement amplitude and normal force on fretting wear behavior of zirconium alloy tube in simulated primary water of PWR

Multidimensional modeling of fuel-cladding friction in an LWR fuel rod

Study on coupling effect of CRUD growth and heat transfer on fuel rod

Development and Verification of Multiphysical Coupling Calculation Code for Typical Pressured Water Reactor Core

Method Research on the Model Optimization of Whole-Core Fuel-Assembly Bowing Based on 3D Variational Algorithm and the Measurement Values

Recent developments in coupled experiments and simulation to understand the fluid–structure dynamics of a Pressurized Water Reactor fuel assembly

CRUD deposition induced multi-physics effects analysis in PWR