Abstract:Regenerative cooling is one of the most promising schemes for providing thermal protection for scramjets. Under multiple cooling channels, flow maldistribution easily leads to overheating and structural failures. Considering the complicated thermal environment in scramjet combustors, this study focuses on the relationship between flow maldistribution and heat transfer non-uniformity to improve the thermal performance. After validating the flow and heat transfer distributions, three types of heat flux boundary conditions and seven geometric configurations are numerically investigated with n-decane as the coolant. The conventional Z-type parallel channels are modeled with severe flow maldistribution, with the highest mass flow rate being four times more than the lowest. Moreover, the non-uniform heat boundary condition causes the maximum temperature with (486.71 K) to significantly vary. To realize a uniform flow distribution, a baffle structure is introduced into the inlet manifold, where high-pressure zones exist near the ribs and flow redistribution occurs. The modified geometry model comprises five additional channels, resulting in a more uniform flow distribution, higher pressure drops, and smaller variation of the maximum temperature under three types of heat loads. Furthermore, the influence of location and quantity of additional channels is analyzed with five additional geometry models. The dominant effect of the geometric structure is revealed, and the influence of heat flux condition strengthens when the flow maldistribution intensifies. The pressure drop in the inlet header increases with decreasing flow area. Additionally, the matching degree of the real and reference flow distributions (MDRR) is defined, which exhibits a better correlation with the thermal performance than flow uniformity. The maximum temperature increases with the MDRR. Moreover, the mass flow rate distribution is not the sole determining factor. The flow field in the inlet manifold also plays a role, contributing to the complexity of the relationship.

Flow and Heat Transfer Characteristics of Supercritical N-Decane in Adjacent Cooling Channels with Opposite Flow Directions

Flow Dynamics in Transient Heat Transfer of N-Decane at Supercritical Pressure

Numerical Study of Heat Flux Reduction Mechanism of the Counterflowing Jet in Rarefied Flows

Inhomogeneous Behavior of Supercritical Hydrocarbon Fuel Flow in a Regenerative Cooling Channel for a Scramjet Engine

Supercritical Heat Transfer of Cryogenic-Propellant Methane in Rectangular Engine Cooling Channels

Flow maldistribution and heat transfer non-uniformity with an inlet baffle structure in regenerative cooling channels

Numerical Analysis of Convective Heat Transfer Characteristics of Supercritical Hydrocarbon Fuel in Cooling Panel with Local Flow Blockage Structure

Study of Heat Transfer of Cryogenic Methane under Supercritical Pressure with Consideration of Thermal Conduction in Engine Cooling Channel Walls

Boundary Effects on Flow Oscillations in Transient Heat Transfer of N-Decane at Supercritical Pressure

Flow Resistance Characteristics of Hydrocarbon Fuel at Supercritical Pressure under Various Heat Fluxes in Regenerative Cooling Channel with Micro-Ribs

Experimental Investigation of the Flow and Heat Transfer Instabilities in N-Decane at Supercritical Pressures in a Vertical Tube

Effects of horizontal self-rotation on flow and heat transfer of supercritical n-decane in regenerative circular/rectangular cooling channels

A Numerical Study of Supercritical Forced Convective Heat Transfer of N-Heptane Inside A Horizontal Miniature Tube

Large Eddy Simulations and Analyses of Hydrocarbon Fuel Heat Transfer in Vertical Upward Flows at Supercritical Pressures

Experimental Investigation of Convective Heat Transfer of Hydrocarbon Fuels at Supercritical Pressures Within Rotating Centrifugal Channel

Numerical Investigation on Heat Transfer Characteristics of Supercritical N-Decane in a Regenerative Cooling Channel with Inverted Pyramid Trusses

Numerical Investigation of Convective Heat Transfer of Supercritical Hydrocarbon Fuel in a Tube Filled With Porous Media

The influences of variable sectional area design on improving the hydrocarbon fuel flow distribution in parallel channels under supercritical pressure

Heat Transfer Enhancement Mechanics of Different Micro-Disturbing Structures for Transcritical Hydrocarbon Fuel Using 3-D Secondary Flow Intensity Analysis

Parametric Study on the Hydrocarbon Fuel Flow Rate Distribution and Cooling Effect in Non-Uniformly Heated Parallel Cooling Channels

Experiment on Flow and Convective Heat Transfer Instability of N-Decane in a Vertical Tube at Supercritical Pressures