Abstract:In order to evaluate the safety margin during a postulated severe accident, a module named ASAP-2D (Accident Simulation on Pressure vessel-2 Dimensional), which can be implemented into the severe accident simulation codes (such as ATHLET-CD), is developed in Shanghai Jiao Tong University. Based on two-dimensional spherical coordinates, heat conduction equation for transient state is solved implicitly. Together with solid vessel thickness, heat flux distribution and heat transfer coefficient at outer vessel surface are obtained. Heat transfer regime when critical heat flux has been exceeded (POST-CHF regime) could be simulated in the code, and the transition behavior of boiling crisis (from spatial and temporal points of view) can be predicted.The module is verified against a one-dimensional analytical solution with uniform heat flux distribution, and afterwards this module is applied to the benchmark illustrated in NUREG/CR-6849. Benchmark calculation indicates that maximum heat flux at outer surface of RPV could be around 20% lower than that of at inner surface due to two-dimensional heat conduction. Then a preliminary analysis is performed on the integrity of the reactor vessel for which the geometric parameters and boundary conditions are derived from a large scale advanced pressurized water reactor. Results indicate that heat flux remains lower than critical heat flux. Sensitivity analysis indicates that outer heat flux distribution is more sensitive to input heat flux distribution and the transition boiling correlation than mass flow rate in external reactor vessel cooling (ERVC) channel, and the correlation for molten vessel and ERVC coolant inlet temperature.According to the results achieved, the new developed module shows good applicability to simulate the pressure vessel behavior during melt pool formation. Thus it can be applied for the future study of the severe accidents relating to lower head integrity. (C) 2015 The Authors. Published by Elsevier Ltd.

Identification and prediction of inherently safe operating conditions for single diffusion controlled liquid-liquid heterogeneous reactions performed in isoperibolic semibatch reactors

Determining the Safe Operating Conditions for Gas-Liquid Heterogeneous Reactions in an Isochoric Semi-Batch Reactor

Classification and optimization of homogeneous reactions with arbitrary reaction orders performed in isoperibolic semi-batch reactors using θMTSR criterion

Realization and Control of Multiple Temperature Zones in Liquid‐containing Gas–solid Fluidized Bed Reactor

Adaptive Temperature Control for Distillation Columns Based on Relative Stability in the Profile Pattern

Development of Adiabatic Criterion for Runaway Detection and Safe Operating Condition Designing in Semibatch Reactors

Safety Criteria for Solid–Liquid Heterogeneous Systems in Semibatch Reactors

Safe Operating Conditions of Isoperibolic Homogeneous Semibatch Reactions: Effect of Mixing Heat

Thermal Risk Assessment of the Complex Nitration Process Through Safety Operating Space Analysis and Optimization

Dynamic Optimization of Multivariable Endothermic Reaction in Cascade CSTR

Prevention Runaway Reaction in a CSTR with Exothermic Reaction

Parametric sensitivity for thermal runaway and its critical criterion in batch reactors with n-order reaction

Parametric sensitivity and thermal runaway critical parameters in non-adiabatic fixed bed reactors

Investigation on Thermal Runaway in Batch Reactors by Parametric Sensitivity Analysis

Operating Zone Segregation of Chemical Reaction Systems Based on Stability and Non-Minimum Phase Behavior Analysis

Effect of process design on the open-loop behavior of a jacketed exothermic CSTR

CFD Simulation to Study Batch Reactor Thermal Runaway Behavior Based on Esterification Reaction

A Two Dimensional Approach for Temperature Distribution in Reactor Lower Head During Severe Accident

Semi-batch reactors: Thermal runaway risk

Comparison of runaway criteria for prediction of different thermal behaviors in the acetic anhydride hydrolysis reaction performing in batch or semi-batch reactors

On Parameter Sensitivity for Thermal Runaway in Batch Reactors