Abstract:The increasing interest in polyurethane materials has raised the question of the environmental impact of these materials. For this reason, the scientists aim to find an extremely difficult balance between new material technologies and sustainable development. This work attempts to validate the possibility of replacing petrochemical polyols with previously synthesized bio-polyols and their impact on the structure and properties of rigid polyurethane-polyisocyanurate (PUR-PIR). To date, biobased polyols were frequently used in the manufacturing of PU, but application of bio-polyols synthesized via solvothermal liquefaction using different chains of polyethylene glycol has not been comprehensively discussed. In this work, ten sets of rigid polyurethane foams were synthesized. The influence of bio-polyols addition on foam properties was investigated by mechanical testing, thermogravimetric analysis (TGA), and cone calorimetry. The structure was determined by scanning electron microscopy (SEM) and a gas pycnometer. The tests revealed a significant extension of foam growth time, which can be explained by possible steric hindrances and the presence of less reactive secondary hydroxyl groups. Moreover, an increase average size of pores and aspect ratio was noticed. This can be interpreted by the modification of the cell growth process by the introduction of a less reactive bio-polyol with different viscosity. The analysis of foams mechanical properties showed that the normalized compressive strength increased up to 40% due to incorporation of more cross-linked structures. The thermogravimetric analysis demonstrated that the addition of bio-based polyols increased temperature of 2% (T 2% ) and 5% (T 5% ) mass degradation. On the other hand, evaluation of flammability of manufactured foams showed increase of total heat release (HRR) and smoke release (TSR) what may be caused by reduction of char layer stability. These findings add substantially to our understanding of the incorporation of bio-polyols into industrial polyurethane systems and suggest the necessity of conducting further research on these materials.

Synthesis of Polyurethanes Through the Oxidative Decarboxylation of Oxamic Acids: a New Gateway Toward Self-blown foams

Synthesis of Polyurethanes Through the Oxidative Decarboxylation of Oxamic Acids: a New Gateway Toward Self-blown Foams

Carbamate Thermal Decarboxylation for the Design of Non-Isocyanate Polyurethane Foams

Fast, catalyst-free room temperature production of isocyanate-free polyurethane foams using aromatic thiols

Biobased, reprocessable, self-blown non-isocyanate polyurethane foams: Influence of blowing agent structure and functionality

Full non-isocyanate polyurethane self-blown foams prepared at room temperature by utilizing Exo-Vinylene Cyclic Carbonates

New Insight on the Study of the Kinetic of Biobased Polyurethanes Synthesis Based on Oleo-Chemistry

Oxime-Based and Catalyst-Free Dynamic Covalent Polyurethanes

Waste-Cooking-Oil-Derived Polyols to Produce New Sustainable Rigid Polyurethane Foams

One‐Step Solvent‐Free Synthesis of Dimer Diamine‐Based Autocatalytic Polyol for the Preparation of Polyurethane Foams

Recent Progress of Non-Isocyanate Polyurethane Foam and Their Challenges

Valorization of waste biomass for the fabrication of isocyanate-free polyurethane foams

Upgrading Sustainable Polyurethane Foam Based on Greener Polyols: Succinic-Based Polyol and Mannich-Based Polyol

Effect of bio-polyol molecular weight on the structure and properties of polyurethane-polyisocyanurate (PUR-PIR) foams

Facile and direct synthesis of oligocarbonate diols from carbon dioxide and their application as sustainable feedstock for polyurethane

Self-Organization of Polyurethane Ionomers Based on Organophosphorus-Branched Polyols

Synthesis of Polyurethane Thermoplastic Elastomer via Phosphonium Borane Lewis Pair Mediated Sequential Homopolymerization of Epoxides and Copolymerization of Epoxides and p-Tosyl Isocyanate

Preparation and Characterization of Glucose-Based Self-Blowing Non-Isocyanate Polyurethane (NIPU) Foams with Different Acid Catalysts

Synthesis of Eugenol-Based Polyols via Thiol–Ene Click Reaction and High-Performance Thermosetting Polyurethane Therefrom

Isocyanate- and phosgene-free routes to polyfunctional cyclic carbonates and green polyurethanes by fixation of carbon dioxide

Synthesis and Properties of ROS-responsive Biodegradable Polyurethanes with Unsaturated Double Bonds