Abstract:This study aimed to determine the mechanical properties of the basalt fiber-reinforced recycled aggregate concrete (BFRRAC)-filled square steel tubular stub columns under axial compression. The replacement ratio of recycled coarse aggregate, the content of basalt fiber, and the strength grade of the BFRRAC were designed as the variable parameters, seven BFRRAC-filled square steel tubular stub columns were designed and subjected to axial compression tests. The failure process and morphologies of the specimens were observed, the load–displacement/strain curves were measured, and the influence rule of variable parameters on the axial compression performance indexes, such as peak bearing capacity, energy dissipation capacity, and ductility coefficient, was discussed. Based on the degradation law of combined secant-stiffness under axial compression, a piecewise mathematical model of stiffness degradation was established. The parametric influence factor was introduced into the design, and the axial compressive stress–strain curve equation was established. Results show that the local bulging failure of all specimens belongs to the category of strength failure. The working process of BFRRAC-filled square steel tubular stub column under axial compression can be divided into three stages: elastic, elastic–plastic, and plasticity. With the increase in the replacement ratio of recycled coarse aggregate, the peak bearing capacity and ductility of specimens were finally weakened, and the energy dissipation capacity first increased and then decreased. With the increase in BFRRAC strength grade, the peak bearing capacity and energy dissipation capacity of the specimens increased while ductility decreased. The addition of a certain amount of basalt fiber has a little effect on the peak-bearing capacity of the specimen, but can improve its energy dissipation capacity and ductility.

Compressive stress-strain behavior and model for geometrical-similar BFRP RC square columns

Stress-Strain Behavior of FRP-Confined Recycled Aggregate Concrete in Square Columns of Different Sizes

Effectiveness of CFRP Confinement and Compressive Strength of Square Concrete Columns

Theoretical Model for Slender FRP-confined Circular RC Columns

FRP Spiral Strip-Confined Concrete Columns: Stress-strain Behavior and Size Effect

Axial Impact Behavior of FRP-Confined Concrete Stub Columns with Square and Circular Cross Section

Experimental Research on Large-scale Square Columns Confined with Wrapped CFRP under Axial Compressive Load

Analysis and Behaviour of FRP-confined Short Concrete Columns Subjected to Eccentric Loading

Behavior of Different-Sized FRP-Confined Square Compound Concrete Columns Containing Recycled Concrete Lumps

Size effect on the compressive behavior of BFRP RC circular columns: Experiments and a size-dependent stress-strain model

Study on Behaviors of FRP Confined Stub Concrete Filled Square Steel Tubes under Axial Load

Experimental-numerical study on axial compression performance of square concrete columns confined by new-type BFRP

Axial Compressive Behavior of FRP-confined Square CFST Columns Reinforced with Internal Latticed Steel Angles for Marine Structures

Size effect of axially-loaded CFRP ring-confined circular concrete columns: 3D mesoscale simulation

Axial Compressive Behavior of Square-Section Concrete Columns Transversely Reinforced with FRP Grids

Axial Compressive and Seismic Performance of GFRP Wrapped Square RC Columns with Different Scales

Experimental research and finite element analysis of square concrete columns confined by FRP sheets under uniaxial compression

Stress-strain Relation of Circular Concrete Columns Strengthened with FRP Considering Size Effect Under Monotonic Axial Loading

SIZE EFFECT ON STRESS-STRAIN RELATION OF FRP STRENGTHENED RECTANGULAR CONCRETE COLUMNS UNDER MONOTONIC AXIAL LOADING

Axial compression behavior of basalt fiber‐reinforced recycled aggregate concrete‐filled square steel tubular stub column