Abstract:Passive vibration isolation techniques with low-frequency characteristics have been a hot topic in the aerospace field. A hydraulic inertial vibration isolator is a highly effective type of isolator for controlling low-frequency vibrations. It typically consists of a main spring, a minor spring, an inertial mass, and a fluid domain. Due to its multi-domain nature, analyzing the isolation mechanism of this type of isolator is challenging. The bond graph method is employed to establish the dynamic model of the isolator. Subsequently, the state equations of the isolator are derived, and the energy equations of both the mechanical and the fluid parts of the isolator are obtained. Based on this, the energy transfer characteristics between the mechanical and fluid domains inside the isolator under external excitation are discussed. The time-domain response of the forces transmitted to the foundation is analyzed. It is shown that the anti-resonance frequency occurs when the forces transmitted to the foundation generated by the main spring and the fluid pressure are equal to that of the minor spring. To verify the proposed method's correctness, a prototype of the isolator is designed and a carefully designed experiment is conducted. The acceleration transmissibility of the isolator is used to conduct a comparative study. The results show that the theoretical results are in good agreement with the experimental results. To depict the dynamic characteristics of the isolator under large amplitude vibration, the nonlinear dynamic model of the isolator is developed, and the corresponding force transmissibility of the isolator is formulated. The energy flow between the mechanical and the fluid domains under this condition is also analyzed. The results indicate that the energy flow responses exhibit a similar change tendency to the force transmissibility. However, the peak of the energy ratio between the mechanical subsystem and the fluid is the same as the linear condition, suggesting that this value is determined by the amplification ratio of the isolator. This research provides enhanced physical insight to understand the dynamic characteristics of this type of isolator and will help to shorten the design cycle of the isolator.

RESEARCH ON PERFORMANCE OF VIBRATING ISOLATION OF AIR SPRING WITH DOUBLE ADDITIONAL GAS CHAMBER

Performance Analysis of High-Static-low-dynamic Stiffness Vibration Isolator with Time-Delayed Displacement Feedback

Theoretical modeling and experimental test for dynamic characteristics of an air-spring vibration isolation system

Research on Modeling and Optimization of a Dual Chamber Air Spring Vibration Isolation System

Effect of Negative Stiffness Mechanism in a Vibration Isolator with Asymmetric and High-Static-low-dynamic Stiffness

Research on Improved Magnetorheological Damper for Wide-Band Vibration Control

Performance Analysis of Dual-Chamber Pneumatic Vibration Isolator

Modeling and analysis of dual-chamber pneumatic spring with adjustable damping for precision vibration isolation

Enhancing Vibration Isolation Performance by Exploiting Novel Spring-Bar Mechanism

Design and Analysis of a Vibration Isolator with Adjustable High Static–Low Dynamic Stiffness

Modeling and parametric research of a bellows-type fluid viscous damper with annular damping gap for spacecraft micro-vibration suppression

Study on the Characteristics of Gas Spring-Damping Modified Model Bladder-Damper Based on Dynamic Mesh Technology

Evaluation and Experiment on Vibration-Isolation Effect of Double-Stage Vibration-Isolation System

Modelling of air springs for metro vehicles and studies on the effect of orifice damping

Dynamic modeling and computer simulation analysis of the air spring suspension

Constant internal pressure air-spring additional air chamber with continuously changed volume

Analysis of Pneumatic Vibration Isolator Considering Diaphragm Stiffness

Design and analysis of a vibration isolation system with cam–roller–spring–rod mechanism

The dynamic properties and performance of the bellows-type hydraulic inerter-based dynamic anti-resonance vibration isolator

Performance enhancements of semi-active vehicle air ISD suspension

The Bond Graph Modeling and Experimental Verification of a Hydraulic Inertial Vibration Isolator Including Nonlinear Effects