Abstract:Alkyl-substituted dibenzothiophenes such as 4,6-dimethyldibenzothiophene are a kind of typical refractory sulfur compound in fuel oil. Herein, three-dimensional ordered macro–mesoporous (3DOM) tungsten oxide catalysts were successfully prepared for aerobic oxidative desulfurization of 4,6-dimethyldibenzothiophene. The experimental results indicated that the as-prepared material 3DOM WOx-400 not only contained a hexagonal packed nanoporous structure but also abundant oxygen defects on its skeleton, exhibiting aerobic oxidative desulfurization of over 99% in 4 h. Moreover, sulfur removal could still reach 99% after recycling five times. Through free radical capture experiments, the superoxide radical is reasonably proposed in the mechanism. This work would provide a feasible route to develop highly efficient nanoporous materials for desulfurization of fuels.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsanm.0c02639?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsanm.0c02639</a>.TGA profiles of the precursor with PMMA (A) and without PMMA (B) (Figure S1); FT-IR spectra of the precursor mixture at different calcination stages (Figure S2); SEM image of the PMMA sphere alloy as the template (Figure S3); macropore diameter distribution of 3DOM WOx-400 (Figure S4); Raman spectrum of commercial WO3 (Figure S5); XPS full-scan spectra of various samples (Figure S6); comparison on W 4f peaks of 3DOM WOx-400 and WOx-400 (Figure S7); W 4f core-level of 3DOM WOx-300 and 3DOM WOx-500 (Figure S8); EPR spectra of various samples (Figure S9); effect of the reaction temperature on sulfur removal in the desulfurization system (Figure S10); GC–MS analysis for the extractant of the catalyst phase after the reaction (Figure S11); SEM images of recycled 3DOM WOx-400 (Figure S12); FT-IR spectra of fresh and recycled 3DOM WOx-400 (Figure S13) (<a class="ext-link" href="/doi/suppl/10.1021/acsanm.0c02639/suppl_file/an0c02639_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

In situ implanting single tungsten site into defective UiO-66(Zr) by solvent-free route for efficient oxidative desulfurization at room temperature.

In Situ Implanting of Single Tungsten Sites into Defective UiO‐66(Zr) by Solvent‐Free Route for Efficient Oxidative Desulfurization at Room Temperature

Engineering Energy Level of Metal Center: Ru Single-Atom Site for Efficient and Durable Oxygen Reduction Catalysis.

Synergistic Palladium Single Sites and Nanoparticles Implanted Into a Novel Zr‐Based Metal–Organic Framework via Solvent‐Free Processing for Upgrading Oxidative Desulfurization Performance

Electronic state tuning over Mo-doped W18O49 ultrathin nanowires with enhanced molecular oxygen activation for desulfurization

Combination of heteropolyacid and UiO-67 (Zr) to generate heterogeneous nanocomposite catalyst for efficient oxidative desulfurization system

In situ bridging encapsulation of a carboxyl-functionalized phosphotungstic acid ionic liquid in UiO-66: A remarkable catalyst for oxidative desulfurization

Grinding-induced solvent-free synthesis of mesoporous zirconia-supported tungsten oxide composite and its superior oxidative desulfurization performance

Defect‐Mediated Synergistic Effect of POM/UiO‐66(Zr) Host–Guest Catalysts for Robust Deep Desulfurization at Ambient Temperature

Three-Dimensional Welded Mn1 Site Catalysts with Nearly 100% Singlet Oxygen Fabrication for Contaminant Elimination

Enhanced Oxygen Activation Achieved by Robust Single Chromium Atom-Derived Catalysts in Aerobic Oxidative Desulfurization

Tungsten oxide nanoparticles encapsulated by porous carbon for boosting H 2 S selective oxidation performance

Heteropolyacids supported on micro/mesoporous materials PMoW@HKUST-1@ZSM-5-MCM-41: Effective catalyst for oxidative desulfurization with oxygen

Aerobic Oxidative Desulfurization by Nanoporous Tungsten Oxide with Oxygen Defects

In situ encapsulation of peroxophosphotungstate in ZIF-8: A highly active, reusable and structurally stable catalyst for desulfurization

The Green Preparation of Mesoporous WO3/SiO2 and Its Application in Oxidative Desulfurization

Size-matched polyoxometalate encapsulated in UiO-66(Zr): an extraordinary catalyst with double active sites for the highly efficient ultra-deep oxidative desulfurization of fuel oil

Atomically Permeated MoP‐WOx Core‐Shell Catalysts for Efficient and Selective Oxidation of Thiophenic Sulfides in Fuels via Direct Electron Transfer Mechanism

Zr-Based Metal-Organic Framework (Uio-66) Doped with Rare-Earth Element (la, Y)-Supported Polyoxometalate Liquid for Oxidative Desulfurization of Dibenzothiophene Oxidation

Sandwich structured Zn–W–Bi–O catalysts with low activation energy for highly effective oxidative desulfurization of oil

In-situ fabrication of MoO 2 /Mo x C heterojunction on rodlike carbon-coated zirconia for enhanced oxidative desulfurization of fuel oils