Abstract:Highly demanded lithium and cobalt are considered critical metals because their reserves in the earth’s crust are relatively low in abundance, and they are found in a few countries. Thus, the extraction of these metals from spent lithium-ion batteries (LIBs) has gained much attention since they are present in relatively high concentrations in the cathode of the battery. Chlorination roasting is an attractive technique of metal extraction because of its salient features: short reaction times and moderate reaction temperatures, selectivity to the extraction of certain metals and in many cases implies the use of low-cost chlorinating reactants. However, there are few studies concerning the recycling of metals through chlorination roasting. This research paper evaluates the chlorination roasting using MgCl2·6H2O as chlorinating reactant followed by water-leaching to recycle lithium and cobalt from the cathode material of spent LIBs. First, a non-isothermal chlorination test between 20 and 900 °C was performed to evaluate how temperature affects the chlorination of the metals and the presence of impurities. Then, isothermal chlorination tests at 420, 440 and 470 °C for times between 60 and 350 min were performed to evaluate the effect of time on the purity of the product. It was found that the chlorination treatment is selective to lithium. HCl(g) generated during the decomposition of MgCl2·6H2O reacts with lithium to produce LiCl. Cobalt is extracted as Co3O4, as it is another product of the chlorination reaction. The product of LiCl impurified with Mg(OH)Cl, formed during the extraction process, was purified by a heat treatment in air at 570 °C for 60 min followed by water-leaching. This treatment also generates MgO as a by-product. The optimum conditions of the extractive process were the followings: 440 °C and 210 min. The extraction yields of lithium and cobalt were 83.29% and 89.66%, respectively. The recycling process proposed here proved to be efficient. Moreover, the magnesium chloride generated as waste from the lithium extraction process from brines could be applied in the process from a circular economy point of view.

Conversion of Lithium Chloride into Lithium Hydroxide Using a Two-Step Solvent Extraction Process in an Agitated Kühni Column

Conversion of Lithium Chloride into Lithium Hydroxide by Solvent Extraction

Removal of impurity metals as phosphates from Lithium-ion battery leachates

Extraction Of LiCl From Low-Purity Chlorides Through Solid Electrolyte Towards High-Purity Li2CO3 Production

Production of Lithium Hydroxide by Electrodialysis with Bipolar Membranes

Study of the Carbochlorination Process with CaCl2 and Water Leaching for the Extraction of Lithium from Spent Lithium-Ion Batteries

Enhanced Dissolution of Metal Oxides in Hydroxylated Solvents - Towards Application in Lithium-Ion Battery Leaching

Sustainable and efficient recovery of lithium from sodium sulfate by-product of lithium hydroxide production process using solvent extraction

Lithium‐Ion Battery Cathode Recycling through a Closed‐Loop Process Using a Choline Chloride‐Ethylene Glycol‐Based Deep‐Eutectic Solvent in the Presence of Acid

A Novel Ternary Deep Eutectic Solvent for Efficient Recovery of Critical Metals from Spent Lithium-Ion Batteries Under Mild Conditions

Selective lithium recovery and integrated preparation of high-purity lithium hydroxide products from spent lithium-ion batteries

Recovery of LiCl and Co3O4 from the cathode material contained in spent lithium-ion batteries using chlorination roasting with MgCl2·6H2O

Low-carbon footprint diluents in solvent extraction for lithium-ion battery recycling

Assessing the Viability of Integrating Evaporation and Solvent Extraction Systems for Lithium Recovery from Low-Grade Brines

Recovery of Li, Co, Cu and Ni by Molten Salt Chlorination

A clean and efficient process for simultaneous extraction of Li, Co, Ni and Mn from spent Lithium-ion batteries by low-temperature NH4Cl roasting and water leaching

Separation of Valuable Metals in The Recycling of Lithium Batteries via Solvent Extraction

Analysis of a Process for Producing Battery Grade Lithium Hydroxide by Membrane Electrodialysis

Recycling of Valuable Metals from the Priority Lithium Extraction Residue Obtained through Hydrogen Reduction of Spent Lithium Batteries