Abstract:The formation of water-conducting fractures in overlying strata caused by underground coal mining not only leads to roof water inrush disasters, but also water-conducting fractures penetrate the aquifer, resulting in the occurrence of a mine-water-inrush disaster and the loss of water resources. It destroys the sustainability of surface water and underground aquifers. This phenomenon is particularly significant in extra-thick coal seams and fault-bearing areas. Numerical simulation is an effective method to predict the failure range of mining overburden rock with low cost and high efficiency. The key to its accuracy lies in a reasonable constitutive model and simulation program. In this study, considering that the three parts of penetrating cracks, non-penetrating cracks, and intact rock blocks are often formed after rock failure, the contact state criterion and shear friction relationship of discrete rock blocks and the mixed fracture displacement–damage–load relationship are established, respectively. Combined with the Mohr–Coulomb criterion, the constitutive model of mining rock mass deformation–discrete block motion and interaction is formed. On this basis, according to the engineering geological conditions of Yushupo Coal Mine, a numerical model for the development of water-conducting cracks in the roof with faults under repeated mining of extra-thick coal seams is established. The results show the following: The constitutive relation of the continuous deformation–discrete block interaction of overlying strata and the corresponding finite element–discrete element FDEM numerical program and VUSDFLD multi-coal seam continuous mining subroutine can numerically realize the formation process of faults and water flowing fractures in overlying strata under continuous mining of extra-thick multi-coal seams. The toughness of sand mudstone is low, and the fracture will be further developed under the repeated disturbance of multi-thick coal seam mining. Finally, it is stabilized at 216–226 m, and the ratio of fracture height to mining thickness is 14.1. When the working face advances to the fault, the stress concentration occurs in the fault and its overlying rock, which leads to the local fracture of the roof rock mass and the formation of cracks. The fault group makes this phenomenon more obvious. The results have been preliminarily applied and tested in Ningwu mining area, which provides theoretical support for further development of roof water disaster control under the condition of an extra-thick coal seam and avoids the loss of water resources in surface water and underground aquifers.

Fractal characteristics of mining-induced overburden fracture development during fully mechanized coal mining

Fractal characteristics of overburden fissures in shallow thick coal seam mining in loess gully areas

Fractal Characteristics of Overburden Rock Fractures and Their Impact on Ground Fissures in Longwall Coal Mining

Study on the evolution of fractures in overlying strata during repeated mining of coal seams at extremely close distances

Fracture Distribution in Overburden Strata Induced by Underground Mining

Study on Fracture Evolution and Water-Conducting Fracture Zone Height beneath the Sandstone Fissure Confined Aquifer

Study on the Evolution Law of Fracture Field in Full-Mechanized Caving Mining of Double System and Extrathick Coal Seam

Evolution and control of overburden fracture in extra-thick coal seam mining with hard roofs: ground grouting sealing and case study

Fracture Development and Fractal Characteristics of Overburden Rock under Repeated Mining

Study on the Fracture Evolution Characteristics of Overlying Strata in a Fully Mechanized Mining Face with a Large Mining Height Based on a Three-Dimensional Large-Scale Physical Simulation Experimental System

Characterization and Quantification of Mining-Induced Fractures in Overlying Strata: Implications for Coalbed Methane Drainage

Study on overburden failure characteristics and displacement rule under the influence of deep faults

Study on Fractal Characteristics of Evolution of Mining-Induced Fissures in Karst Landform

The fracturing characteristics of rock mass of coal mining and its effect on overlying unconsolidated aquifer in Shanxi, China

Evolution mechanism of water-conducting fractures in overburden under the influence of water-rich fault in underground coal mining

Investigating Disaster Mechanisms Triggered by Abrupt Overburden Fracture Alterations in Close-Seam Mining Beneath an Exceptionally Thick Sandstone Aquifer

Evolution Characteristics of a High-Level Asymmetric Fracture-Seepage Community and Precise Coalbed Methane Drainage Technology during Mining of Outburst-Prone Coal Seam Groups

Finite–Discrete Element Method Simulation Study on Development of Water-Conducting Fractures in Fault-Bearing Roof under Repeated Mining of Extra-Thick Coal Seams

Study on the damage characteristics of overburden of mining roof in deeply buried coal seam

Regional Division and Its Criteria of Mining Fractures Based on Overburden Critical Failure

Study of the Fracture Law of Overlying Strata under Water Based on the Flow-Stress-Damage Model