Abstract:Uncertainty in structural loading during launch is a significant concern in the development of spacecraft and launch vehicles. Small variations in launch vehicle and payload mode shapes and their interaction can result in significant variation in system loads. In many cases involving large aerospace systems, it is difficult, not economical, or impossible to perform a system modal test. However, it is still vital to obtain test results that can be compared with analytical predictions to validate models. Instead, the “Building Block Approach” is used in which system components are tested individually. Component models are correlated and updated to agree as best they can with test results. The Space Launch System consists of a number of components that are assembled into a launch vehicle. Finite element models of the components are developed, reduced to Hurty/Craig-Bampton models, and assembled to represent different phases of flight. The only opportunity to obtain modal test data from an assembled Space Launch System will be during the Integrated Modal Test. There is always uncertainty in every model, which flows into uncertainty in predicted system results. Uncertainty quantification is used to determine statistical bounds on prediction accuracy based on model uncertainty. For the Space Launch System, model uncertainty is at the Hurty/Craig-Bampton component level. Uncertainty in the Hurty/Craig-Bampton components is quantified using the hybrid parametric variation approach, which combines parametric and nonparametric uncertainties. Uncertainty in model form is one of the biggest contributors to uncertainty in complex built-up structures. This type of uncertainty cannot be represented by variations in finite element model input parameters and thus cannot be included in a parametric approach. However, model-form uncertainty can be modeled using a nonparametric approach based on the random matrix theory. The hybrid parametric variation method requires the selection of dispersion values for the Hurty/Craig-Bampton fixed-interface eigenvalues and the Hurty/Craig-Bampton stiffness matrices. Component test/analysis frequency error is used to identify fixed-interface eigenvalue dispersions, while test/analysis cross-orthogonality is used to identify stiffness dispersion values. The hybrid parametric variation uncertainty quantification approach is applied to the Space Launch System Integrated Modal Test configuration. Monte Carlo analysis is performed, and statistics are determined for modal correlation metrics, frequency response from Integrated Modal Test shakers to selected accelerometers, as well as other metrics for determining how well target modes are excited and identified. If the predicted uncertainty envelopes future Integrated Modal Test results, then there will be increased confidence in the utility of the component-based hybrid parametric variation uncertainty quantification approach.

Uncertainty Quantification of Artemis I Space Launch System Integrated Aerodynamics Databases

MULTI-FIDELITY MODELING OF PROBABILISTIC AERODYNAMIC DATABASES FOR USE IN AEROSPACE ENGINEERING

Quantification Of Performance Uncertainty For A Transonic Compressor Rotor Using An Adaptive Nipc Method

SLS Integrated Modal Test Uncertainty Quantification Using the Hybrid Parametric Variation Method

Computational Techniques to Generate Space Launch System Aerodynamic Databases

Probabilistic Analysis of Aircraft Using Multi-Fidelity Aerodynamics Databases

Global Sensitivity Analysis and Estimation of Model Error, Toward Uncertainty Quantification in Scramjet Computations

Effects of Uncertainties in the Launch Parameters on the Pressure-Equalizing Air Film Around a Vertically Launched Underwater Vehicle

Data-driven uncertainty quantification for Formula 1: Diffuser, wing tip and front wing variations

Uncertainty Calculation for Spacecraft Thermal Models Using a PCE Method

Uncertainty Analysis for Return Trajectory of Vertical Takeoff and Vertical Landing Reusable Launch Vehicle

Robust optimization and uncertainty quantification of a micro axial compressor for unmanned aerial vehicles

Implementing the EHFE-Gebhart Model for Efficient Spacecraft Uncertainty Thermal Analysis

Uncertainty and Sensitivity Study on Lateral Jet Interaction for Hypersonic Missile

Dynamical structure of the motion around asteroids with uncertain gravity and solar radiation pressure

Artemis I Versus Wind-Tunnel Buffet-Induced Forces and Structural Responses

Efficient Uncertainty Analysis of External Heat Flux of Solar Radiation with External Heat Flux Expansion for Spacecraft Thermal Design

Uncertainty Quantification of the Surface Properties in Hypersonic Rarefied Cylinder Flows

A Methodology to Identify Physical or Computational Experiment Conditions for Uncertainty Mitigation

Survey on Studies about Model Uncertainties in Small Body Explorations

A confidence-based aerospace design approach robust to structural turbulence closure uncertainty