Abstract:This paper focuses on the optimal takeoff of a coaxial compound helicopter, considering the possibility of engine failure. When one engine fails during takeoff, a twin-engine helicopter must either reject the takeoff (RTO) before reaching the takeoff decision point (TDP) or continue the takeoff (CTO) after the TDP. This study aims to determine the theoretical TDP by striking a balance between CTO and RTO while considering uncertainties that arise during takeoff. To achieve this goal, a multistep optimisation structure that involves uncertainty quantification is proposed. Firstly, an aircraft with a developed engine power dynamics model is established for the one-engine-inoperative problem. The entire takeoff procedures, from all-engine-operating (AEO) takeoff to CTO/RTO, are formulated as nonlinear trajectory optimisation problems. A typical takeoff is analysed to illustrate the takeoff characteristics and the conventional procedure to determine the TDP of a coaxial compound helicopter. It is found that the interference between the coaxial rotor results in an inevitable height increase during landing, with each 1-m increase in failure height resulting in 2.28 m of additional height rising. Then a robust TDP and AEO takeoff are identified by applying a multistep optimisation structure, where the influences of uncertainties are discussed. Results indicate it is feasible to define TDP as a single speed or height indicator despite the uncertainties. The recommended speed indicator is slightly lower than the takeoff safety speed, and the speed ensures a short runway length and successful CTO regardless of the AEO takeoff. In addition, an AEO takeoff path is recommended, which shortens the runway length by 10%, and the corresponding liftoff speed is slightly lower than the TDP speed. Overall, the proposed multistep optimisation structure and uncertainty quantification approach help to achieve a robust takeoff performance for a coaxial compound helicopter with consideration of engine failure.

Aerodynamic Uncertainty Quantification for Tiltrotor Aircraft

Quantification Of Performance Uncertainty For A Transonic Compressor Rotor Using An Adaptive Nipc Method

Aerodynamic Shape Optimization Of A Turbine Blade Considering Geometric Uncertainty Using An Adjoint Method

Faster-than-realtime inverse simulation method for tiltrotor handling qualities investigation

Numerical analyses of aeroacoustic characteristics of tiltrotor considering the aerodynamic interaction by the fuselage in hover

Rotor Cross-Tilt Optimization of Manned Multi-rotor Evtol Aircraft for Yaw Control Efficiency

Large-Sized Multirotor Design: Accurate Modeling with Aerodynamics and Optimization for Rotor Tilt Angle

Optimal Landing of Tilt-rotor Aircraft after Engine Failure Considering Pilot Inherent Limitations.

EVTOL Tilt-Wing Aircraft Design under Uncertainty Using a Multidisciplinary Possibilistic Approach

Modeling and control of a class of urban air mobility tiltrotor aircraft

Numerical Simulation on Aerodynamic Characteristics of Transition Section of Tilt-Wing Aircraft

Aerodynamic Simulation of a Typical Multirotor e VTOL Aircraft Configuration.

Numerical simulation of the transition flight aerodynamics of cross-shaped quad-tiltrotor UAV

Takeoff optimisation of coaxial compound helicopter with uncertainty quantification

Evaluation of dynamic loads and performance indexes in tiltrotors using a mid-fidelity aeroservoelastic tool

Modelling and Robust Control of an Unmanned Coaxial Rotor Helicopter with Unstructured Uncertainties

Aerodynamic interference analysis and modeling of heterogeneous rotors

Longitudinal dynamic modelling and control for a quad-tilt rotor UAV

Multiple Modeling and Fuzzy Switching Control of Fixed-Wing VTOL Tilt-Rotor UAV

Aerodynamic Analysis of Rotor Spacing and Attitude Transition in Tilt-Powered Coaxial Rotor UAV

Investigation on high-dimensional uncertainty quantification and reliability analysis of aero-engine