Abstract:Aiming to polish up the denitrification efficiency and N2 selectivity for MnCeO x catalyst at low temperature, an array of Fe3+-doped MnCeO x catalysts were synthesized through innovative approaches: the citric acid method (FeMnCeO x -CA) and CTAB-assisted template method (FeMnCeO x -ST). However, the catalysts prepared by CTAB-assisted template method (MnCeO x -ST and FeMnCeO x -ST catalysts) did not exhibit an excellent low-temperature activity compared with the catalysts made by citric acid method (MnCeO x -CA and FeMnCeO x -CA catalysts) below 300 °C. Therefore, an in-depth investigation of underlying impact of citric acid method and Fe3+ doping on MnCeO x catalyst was thoroughly implemented. We finally found that the main function of citric acid is to enhance the internal electron transfer of the catalyst by facilitating the mutual conversion between active components, particularly Mn4+/Mn3+, thereby improving the denitrification activity of FeMnCeO x -CA catalyst at low temperature. Further, the NH3-SCR performance of FeMnCeO x -CA exceed 90 % NO x conversion within 75–150 °C, and it can be reached 94 % NO x conversion at 125 °C, which was almost 10 % higher than that of MnCeO x -CA catalyst. Moreover, the N2O formation of FeMnCeO x -CA is significantly suppressed at temperatures ranging from 125-200 °C, exhibiting a higher N2 selectivity compared to MnCeO x -CA. Besides, solid solution structure of −Ce-O-Mn-O-Fe- formed after Fe3+ doping in MnCeO x catalyst strengthened surface acidity and redox ability over FeMnCeO x -CA catalyst, promoting NH3 adsorption and activation. On the other hand, the FeMnCeO x -CA catalyst exhibits the highest content of Ce3+ and Mn4+, facilitating oxygen vacancies formation and redox capacity, thereby promoting the key intermediates generation in the microscopic NH3-SCR reaction process. Finally, a reasonable Langmuir-Hinshelwood mechanism and detailed reaction pathways of NH3-SCR reaction existed on FeMnCeO x -CA catalyst were also proposed.

Study on denitration performance of mineral catalyst prepared by high energy ball milling of rare earth concentrate supported Fe2O3 for NH3-SCR

Highly Efficient Fe-Cu/CL Catalysts Based on Low-Cost Clay Minerals for NH3-SCR of NOx at Low Temperature

Boosted Denitration Activity of Α-Fe2o3 for Low-Temperature NH3-SCR by Addition of Ce/Cu

Tailoring the Proceeding of the NH3-SCO and NH3-SCR Reactions over FeOx Catalysts by Modifying with NbOx

Study on NH3-SCR performance and mechanism of Fe/Mn modified rare earth concentrate

Magnetic iron-cerium-tungsten mixed oxide pellets prepared through critic acid sol-gel process assisted by microwave irradiation for selective catalytic reduction of NOx with NH3

Preparation of high temperature NH3-SCR catalysts with carbonate as precursors by ball milling method

Selective Catalytic Reduction of NOx with NH3 over Short-Range Ordered W-O-Fe Structures with High Thermal Stability

Study on denitrification performance of rare earth tailings monolithic catalyst prepared with sulfuric acid

Low-temperature NH3-SCR catalytic characteristic of Ce-Fe solid solutions based on rare earth concentrate

Doping effect of rare earth metal ions Sm3+, Nd3+ and Ce4+ on denitration performance of MnO catalyst in low temperature NH3-SCR reaction

Effect of Mo on the selective catalytic reduction of NOx with NH3 in the magnetic separation of rare earth tailings

Optimizing Selective Catalytic Reduction of NO with NH3 on Fe2O3/WO3 Via Redox‐Acid Synergy

Develop high efficient of NH3-SCR catalysts with wide temperature range by ball-milled method

Enhancement Of Scr Performance Of Monolithic Mn-Ce/Al2o3/Cordierite Catalysts By Using Modified Deposition Precipitation Method

Mineral-derived Catalysts Optimized for Selective Catalytic Reduction of NOx with NH3

Mesoporous MnOx-CeO2 composites for NH3-SCR: the effect of preparation methods and a third dopant

Effect of Fe2O3 on ZrTiO4 Support for NH3-SCR Catalytic Performance

Ultrasonication-Assisted Preparation of a Mn-Based Blast Furnace Slag Catalyst: Effects on the Low-Temperature Selective Catalytic Reduction Denitration Process

Mechanistic insights into the influence of preparation methods and Fe3+ doping on the low-temperature performance of MnCeO catalyst for NH3-SCR reaction

Influence of Preparation Methods on the Physicochemical Properties and Catalytic Performance of MnOx-CeO2 Catalysts for NH3-SCR at Low Temperature