Abstract:In this research, an experimental investigation of hybrid nanofluid mixed convection heat transfer characteristics is conducted. The research specifically investigates the effects of percentage weight composition (PWC) of nanoparticles in the hybrid nanofluids on mixed convection heat transfer characteristics along the lamina, transition and turbulent regions. Transition boundaries, thermal entrance effects, and the influence of tube axial position were also critically investigated and analysed experimentally. Three hybrid nanofluids of Al 2 O 3 – MWCNT (i.e., Al 2 O 3 (60%) – MWCNT (40%), Al 2 O 3 (50%) – MWCNT (50%) and Al 2 O 3 (40%) – MWCNT (60%)) were prepared using two-step method and then subjected to a constant heat flux through a horizontal circular copper tube with an internal diameter of 8mm. Results show a significant change in heat transfer characteristics with different PWCs. Al 2 O 3 (60%) – MWCNT (40%) have shown a better heat transfer enhancement among the three fluids investigated. Its Nusselt number has an enhancement of more than 5 % better than the other two fluids. Along the transition regime, critical Reynold numbers (Re cr ) of the three nanofluids were found to have differed slightly, with Re cr = 2020, 2000 and 2100 for Al 2 O 3 (60%) – MWCNT (40%), Al 2 O 3 (50%) – MWCNT (50%) and Al 2 O 3 (40%) – MWCNT (60%) respectively. Mixed convection effects were found to be more significant with Al 2 O 3 (60%) – MWCNT (40%) than with the other two fluids. At the axial position of 63.75, its mixed convection strength (Ὠ) was about 41%, which is the highest among the three fluids. Its strength of mixed convection was also found to deteriorate to about 14.75% with an increase in axial distance from the tube inlet. A similar observation was also noticed with other fluids. Thermal entrance effects were only found to be significant at x/d = 15 and 31.25, as their influence diminishes with an increased x/d distance from the tube inlet. It was concluded that both mixed convection and thermal entrance effects resulted in heat transfer enhancement, especially in the lamina region. Their influences decrease with an increase in axial distance from the tube inlet. Mixed convection influences were only present in the lamina and transition region, and their strength was reduced with an increase in Reynold number and axial position.

Numerical investigation of fluid flow and heat transfer characteristics of MWCNT-Al2O3/H2O hybrid nanofluid flowing through a novel semi-arc ribbed square duct

Thermo-hydraulic performance evaluation and comparison of SiC-MWCNT and Al2O3-MWCNT Non-Newtonian hybrid nanofluids using a heat exchanger equipped with helically corrugated tubes: an experimental study

Convective Heat Transfer and Pumping Power Analysis of MWCNT + Fe3O4/Water Hybrid Nanofluid in a Helical Coiled Heat Exchanger with Orthogonal Rib Turbulators

Thermo-hydraulic and entropy generation analysis of nanofluid flow with variable properties in various duct cross sections: a 3-D two-phase approach

CFD analysis on heat and flow characteristics of double helically coiled tube heat exchanger handling MWCNT/water nanofluids

Forced convection heat transfer of water/FMWCNT nanofluid in a microchannel with triangular ribs

A study on MHD flow of SWCNT-Al2O3/water hybrid nanofluid past a vertical permeable cone under the influence of thermal radiation and chemical reactions

Thermal analysis of 3D Darcy–Forchheimer flow of SWCNT–MWCNT/sodium alginate on Riga plate

Efficient Heat Transfer Augmentation in Channels with Semicircle Ribs and Hybrid Al2O3-Cu/Water Nanofluids

Computational Analysis of Turbulent Flow Characteristics in Nanofluids Containing 1-D and 2-D Carbon Nanomaterials: Grid Optimization and Performance Evaluation

Numerical investigation on forced convection in rectangular cross section micro-channels with nanofluids

Numerical investigation of thermal performance augmentation of nanofluid flow in microchannel heat sinks by using of novel nozzle structure: sinusoidal cavities and rectangular ribs

Single-phase fluid flow and heat transfer characteristics of nanofluid in a circular microchannel: Development of flow and heat transfer correlations

Numerical computation of CNTs water based nanofluid flow with heat generation/absorption past an oscillating vertical plate with variable temperature

A numerical study of water based nanofluids in shell and tube heat exchanger

Mixed Convection Heat Transfer Characteristics of Al 2 O 3 – MWCNT Hybrid Nanofluid under Thermally Developing Flow; Effects of Particles Percentage Weight Composition

Development of machine learning algorithm for assessment of heat transfer of ternary hybrid nanofluid flow towards three different geometries: Case of artificial neural network

Experimental investigation of the performance of the plate heat exchanger using (Multi-Walled Carbon Nanotubes–Al2O3/water) hybrid nanofluid

MHD conjugate heat transfer and entropy generation analysis of MWCNT/water nanofluid in a partially heated divided medium

Numerical study on the characteristics of heat transport through a trihybrid Jeffrey nanoliquid flowing about a radiant and magnetized cylinder

Heat Transfer Enhancement Using Al2O3-MWCNT Hybrid-Nanofluid inside a Tube/Shell Heat Exchanger with Different Tube Shapes