Abstract:As state-of-the-art (SOA) lithium-ion (Li-ion) batteries approach their specific energy limit (∼250 Wh kg-1), layer-structured, nickel-rich (Ni-rich) lithium transition metal oxide-based cathode materials, e.g., LiNi0.8Mn0.1Co0.1O2 (NMC811), have attracted great interest owing to their practical high specific capacities (>200 mAhg-1). Coupled with their high average discharge voltages (∼4 V vs Li/Li+), Ni-rich cathode-based lithium batteries possess a great potential to achieve much higher specific energies (>350 Wh kg-1 at the cell level) than the SOA Li-ion counterparts. In addition, Ni-rich oxides are low-cost battery cathode materials due to their low cobalt contents. However, Ni-rich cathode-based lithium batteries suffer quick capacity degradations upon cycling, particularly at high upper cutoff voltages (e.g., ≥4.5 V vs Li/Li+), due to crystal structure changes of the active cathode materials and parasitic side reactions at the electrolyte/electrode interfaces. In this study, a fluorinated-solvent-based, high-voltage stable electrolyte (HVE), i.e., 1 M Li bis(trifluoromethanesulfonyl)imide (LiTFSI) in fluoroethylene carbonate (FEC), bis(2,2,2-trifluoroethyl) carbonate (FDEC), and methyl (2,2,2-trifluoroethyl) carbonate (FEMC) with Li difluoro(oxalate)borate (LiDFOB) additive, was formulated and evaluated in Li/NMC811 battery cells. To the best of our knowledge, this class of electrolyte has not been investigated for Ni-rich cathode-based lithium batteries. Li/NMC811 cells with HVE exhibited a superior long-term cycle performance stability, maintaining ∼80% capacity after ∼500 cycles at a high cutoff voltage of 4.5 V (vs Li/Li+) than a baseline carbonate-solvent-based electrolyte (BE). The superior cycle stability of the Li/NMC811 cells is attributed to the inherently high-voltage stability of HVE, supported by the physical and electrochemical analyses. This conclusion is supported by our density functional theory (DFT) modeling where HVE shows a less tendency of deprotonation/oxidation than BE, leading to the observed cycle stability. The findings in this study are important to help tackle the technical challenges facing Ni-rich cathode-based lithium batteries to realize their high energy density potentials with a long cycle life.

Interface stabilization of 1,1,2,2-tetrafluoroethyl-2,2,3,3-tetrafluoropropyl ether to high-voltage Li-rich Mn-based layered cathode materials

Ordered LiNi0.5Mn1.5O4 Cathode in Bis(fluorosulfonyl)imide-Based Ionic Liquid Electrolyte: Importance of the Cathode-Electrolyte Interphase

Locally Fluorinated Electrolyte Medium Layer for High-Performance Anode-Free Li-Metal Batteries.

Effect of Fluoroethylene Carbonate As an Electrolyte Solvent in the LiNi0.5Mn1.5O4/Li4Ti5O12 Cell

Investigation of fluorinated ether‐containing electrolytes for high energy‐density nickel‐rich LiNi 0 . 8 Co 0 . 1 Mn 0 . 1 O 2 electrodes

Effect of Fluoroethylene Carbonate Electrolyte Additives on the Electrochemical Performance of Nickel-Rich NCM Ternary Cathodes

Electrolyte Optimization to Improve the High-Voltage Operation of Single-Crystal LiNi0.83Co0.11Mn0.06O2 in Lithium-Ion Batteries

Synergistic Effect of Fluorinated Solvents for Improving High Voltage Performance of LiNi0.5Mn1.5O4 Cathode

Synergistic Effect of Fluorinated Solvents for Improving High Voltage Performance of LiNi 0.5 Mn 1.5 O 4 Cathode

Mn-Rich Induced Alteration on Band Gap and Cycling Stability Properties of LiMnxFe1-xPO4 Cathode Materials.

Cryo‐TEM Study of High‐Performance Iron Difluoride Cathode Enabled by Low Temperature CVD Carbon Coating

Synchronous dual additives to boost multiphase interface stability of high-voltage Li-rich Mn-based batteries

Unraveling and Mitigating the Storage Instability of Fluoroethylene Carbonate-Containing LiPF6 Electrolytes to Stabilize Lithium Metal Anodes for High-Temperature Rechargeable Batteries

Tuning Li 2 MO 3 Phase Abundance and Suppressing Migration of Transition Metal Ions to Improve the Overall Performance of Li- and Mn-rich Layered Oxide Cathode

Fluorine-induced Reversible Cation/anion Redox Reactions to Enhance Stability in Li-rich Layered Oxides

Research on the synergistic effect of fluoroethylene carbonate and lithium difluoro(oxalato)borate in electrolyte on LiNi0.5Mn1.5O4-based high-voltage lithium-ion batteries

Enhancing cycling stability in Li-rich Mn-based cathode materials by solid-liquid-gas integrated interface engineering

High-voltage ether-based electrolytes for lithium metal batteries via synergy between the solvent and additive

Fluorinated High-Voltage Electrolytes To Stabilize Nickel-Rich Lithium Batteries

Concentrated Ternary Ether Electrolyte Allows for Stable Cycling of a Lithium Metal Battery with Commercial Mass Loading High‐nickel NMC and Thin Anodes

Quenching-Induced Ultrathin LiF-Rich Interphases on LiNi0.8Co0.1Mn0.1O2 Cathode