Abstract:Cycle life of lithium-ion batteries (LIBs) is essential for the application of hybrid electric vehicles (HEV) and electric vehicles (EV). Since temperature greatly affects degradation rate and safety of LIBs, battery thermal management system (BTMS) is required. In this paper, the performance of active air cooling and passive phase change material (PCM) cooling for BTMS are assessed in terms of battery thermal states and cycle life. A coupled one-dimensional electrochemical and two-dimensional thermal models are developed to simulate the temperature of a battery module with 16 cylindrical (26650) graphite-LiFePO4 lithium-ion battery cells. The model is validated with the experimental data taken from literature. By applying a realistic current profile of a HEV to the battery model, simulations are performed at various ambient temperatures, inlet velocities of air cooling and PCM phase change temperatures. The battery cycle life and its non-uniformity across the module are estimated with a battery degradation model with inputs of battery temperature results. The study shows that active air cooling has a better cooling effect than PCM cooling, especially at high ambient temperatures. But the active air cooling leads to a large temperature non-uniformity at low inlet air velocities. The cycle life of the battery module under air cooling is longer than that of PCM cooling, although a larger life non-uniformity is observed. Furthermore, two methods are compared by a newly proposed evaluation index called cyclical cost. This index considers both the battery cycle life and the parasitic power consumption of the BTMS. The result demonstrates that air cooling has a lower cyclical cost than PCM cooling. When the inlet velocity of the air cooling system increases, the cyclical cost has a trend of decreasing first and then increasing. This paper provides a guide for the development of BTMS to further prolong the cycle life and reduce total operating cost of LIBs.

Lifetime and efficiency analysis and optimization of PEMFC-based combined heat and power system with auxiliary heating for battery

Air and PCM cooling for battery thermal management considering battery cycle life

Comprehensive performance assessment and multi-objective optimization of high-power proton exchange membrane fuel cell system under variable load

Comprehensive performance analysis and optimization for PEMFC-heat pump combined system considering dual heat source

Performance Analysis and Optimization of a High-Temperature PEMFC Vehicle Based on Particle Swarm Optimization Algorithm

Energy management for proton exchange membrane fuel cell-lithium battery hybrid power systems based on real-time prediction and optimization under multimodal information

Modeling and optimization of a residential PEMFC-based CHP system under different operating modes

A single-phase, non-isothermal model for PEM fuel cells

Simulation and Analysis of Steady State Characteristics of Hundred Kilowatt Proton Exchange Membrane Fuel Cell Combined Heat and Power System Based on Hydrogen Production from Natural Gas

Performance evaluation on thermodynamics-economy-environment of PEMFC vehicle power system under dynamic condition

Thermodynamic and economic study of PEMFC stack considering degradation characteristic

Performance prediction and enhancement strategy of a new proton exchange membrane fuel cell-hydrophilic modified tubular still hybrid system

Performance analysis and optimization of a vehicular LT-PEMFC for maximum power density and efficiency based on NSGA-II algorithm

Thermodynamic Modeling and Performance Analysis of Vehicular High-Temperature Proton Exchange Membrane Fuel Cell System

Advancing heat management in proton-exchange membrane fuel cells through hybrid nano-composite phase change materials

Sensitivity analysis of energy, exergy, and environmental models for a combined cooling, heating, and power system at different operating conditions of proton exchange membrane fuel cell

Advances of membrane electrode assembly aging research of proton exchange membrane fuel cell under variable load: degradation mechanism, aging indicators, prediction strategy, and perspectives

Multi-criteria evaluation and optimization of PEM fuel cell degradation system

Performance enhancements of power density and exergy efficiency for high-temperature proton exchange membrane fuel cell based on RSM-NSGA III

A review on lifetime prediction of proton exchange membrane fuel cells system

Performance optimization study on the thermal management system of proton exchange membrane fuel cell based on metal hydride hydrogen storage