Abstract:For the efficient and effective detection in automatic non-destructive testing (NDT) of weld defects, the NDT probe must stay aligned with the welds. It is essential to detect the deviation between the seam and the probe by means of weld recognition, in order to adjust the relative position between the workpiece and the probe. The traditional weld recognition method is suitable for real-time seam tracking when the geometric feature of the groove is distinct; however, it may fail when applied to the formed weld recognition. Other methods proposed by researchers are unsatisfactory in the signal-to-noise ratio of imaging, separation degree of visual features and efficiency of the processing algorithm. To solve these problems, this paper proposes a novel visual weld recognition method using two directional lights. The directional lights are projected onto the edges of the seam to produce the distinct man-made “light and shadow” (LS) features. In this paper, we first study the principles and sensing requirements of the LS features; then a stroboscopic circuit is established to lighten the two directional lights alternatively and meanwhile synchronizes the camera to capture images when each light is on. Afterwards, we propose an image processing algorithm based on thresholding and edge extraction to calculate the accurate edges of the seam. Finally, a weld detection platform is established and experiments on weld recognition and deviation correction are conducted. The experiment results show that the proposed detection method can recognize the edges of the seam effectively in 0.023mm accuracy. The time cost of the image processing algorithm is not more than 13ms. The proposed method is suitable for weld detection where the reinforcements of the seams are as low as 1mm. It expected to be applied to the automatic vision-guided NDT of weld defects.

The 3D narrow butt weld seam detection system based on the binocular consistency correction

Real-time detection and localization method for weld seam of narrow butt joint based on semantic segmentation

A Precise Visual Method For Narrow Butt Detection In Specular Reflection Workpiece Welding

Vision Sensing and Surface Fitting for Real-Time Detection of Tight Butt Joints

A Vision Based Detection Method For Narrow Butt Joints And A Robotic Seam Tracking System

3D vision-based weld seam extraction method

A robust weld seam detection method based on particle filter for laser welding by using a passive vision sensor

A 3D Vision-Based Weld Seam Extraction Method for Arbitrarily Placed Spatial Planar Weldments

Additive seam tracking technology based on laser vision

A 3D seam extraction and tracking method based on binocular structured light sensor

Seam detection method design and automatic calibration based on an active light coaxial visual sensor

An image segmentation-based localization method for detecting weld seams

Robotic Seam Tracking System Combining Lightweight Segmentation Network Design and ADMM-Based Structured Pruning

A Novel 3D Complex Welding Seam Tracking Method in Symmetrical Robotic MAG Welding Process Using a Laser Vision Sensing

Robust weld seam tracking method based on detection and tracking of laser stripe

A Visual Weld Edge Recognition Method Based on Light and Shadow Feature Construction Using Directional Lighting

3D reconstruction of complex spatial weld seam for autonomous welding by laser structured light scanning

A weld seam feature real-time extraction method of three typical welds based on target detection

A Novel 3D Seam Extraction Method Based on Multi-Functional Sensor for V-Type Weld Seam

Intelligent Seam Tracking in Foils Joining Based on Spatial–temporal Deep Learning from Molten Pool Serial Images

Intelligent Perception and Seam Tracking System for Thick Plate Weldments Based on Constant-Focus Optical Path