Abstract:For the efficient and effective detection in automatic non-destructive testing (NDT) of weld defects, the NDT probe must stay aligned with the welds. It is essential to detect the deviation between the seam and the probe by means of weld recognition, in order to adjust the relative position between the workpiece and the probe. The traditional weld recognition method is suitable for real-time seam tracking when the geometric feature of the groove is distinct; however, it may fail when applied to the formed weld recognition. Other methods proposed by researchers are unsatisfactory in the signal-to-noise ratio of imaging, separation degree of visual features and efficiency of the processing algorithm. To solve these problems, this paper proposes a novel visual weld recognition method using two directional lights. The directional lights are projected onto the edges of the seam to produce the distinct man-made “light and shadow” (LS) features. In this paper, we first study the principles and sensing requirements of the LS features; then a stroboscopic circuit is established to lighten the two directional lights alternatively and meanwhile synchronizes the camera to capture images when each light is on. Afterwards, we propose an image processing algorithm based on thresholding and edge extraction to calculate the accurate edges of the seam. Finally, a weld detection platform is established and experiments on weld recognition and deviation correction are conducted. The experiment results show that the proposed detection method can recognize the edges of the seam effectively in 0.023mm accuracy. The time cost of the image processing algorithm is not more than 13ms. The proposed method is suitable for weld detection where the reinforcements of the seams are as low as 1mm. It expected to be applied to the automatic vision-guided NDT of weld defects.

A weld seam feature real-time extraction method of three typical welds based on target detection

Feature point extraction based on contour detection and corner detection for weld seam

Weld Seam Detection Method with Rotational Region Proposal Network.

Research on a Feature Point Detection Algorithm for Weld Images Based on Deep Learning

A weld feature points detection method based on improved YOLO for welding robots in strong noise environment

Real-time weld seam feature extraction in construction sites

Weld feature extraction method based on inter-frame constraint and dynamic template

A 3D Vision-Based Weld Seam Extraction Method for Arbitrarily Placed Spatial Planar Weldments

Real-time segmentation network for accurate weld detection in large weldments

Coarse-to-Fine Detection of Multiple Seams for Robotic Welding

Weld Seam Recognition Based On CCD Image Processing

Defect detection method for high-resolution weld based on wandering Gaussian and multi-feature enhancement fusion

A Method of D-Type Weld Seam Extraction Based on Point Clouds

Feature Extraction of Welding Seam Image Based on Laser Vision

Weld seam track identification for industrial robot based on illumination correction and center point extraction

An automatic feature point extraction method based on laser vision for robotic multi-layer multi-pass weld seam tracking

Robust weld seam tracking method based on detection and tracking of laser stripe

3D vision-based weld seam extraction method

An image segmentation-based localization method for detecting weld seams

A Visual Weld Edge Recognition Method Based on Light and Shadow Feature Construction Using Directional Lighting

Weld seam profile extraction using top-down visual attention and fault detection and diagnosis via EWMA for the stable robotic welding process