Abstract:Polymers used in almost any situation face the threat of sudden fire, and application scenarios with high requirements on friction performances of polymers are no exception. Herein, P- and N-codoped molybdenum disulfide (PNMoS2) nanosheets were fabricated via the original process of ball milling, followed by annealing, which subsequently served as the template to grow the two-dimensional (2D) cobalt borate (Co–Bi) ultrathin nanosheets for the generation of PNMoS2@Co–Bi dual sheets. With the introduction of 2 wt % PNMoS2@Co–Bi dual nanosheets into epoxy resin (EP), defined as EP/PNMoS2@Co-Bi, an obvious reduced peak heat release rate of 28.0% and a total heat release of 27.9%, respectively, were obtained. It is noted that the total smoke release, which is vital for evacuation and life safety, has been reduced by 41.8%. In addition, EP/–Bi achieved a significantly improved LOI, UL-94, and thermal performance, along with the high char yield (22.9 wt %) and remarkably decreased mass loss rate. Interestingly, the loading of 2 wt % PNMoS2 has the lowest friction coefficient value (decrease by 18.7%) and volume wear rate (46.1% reduction than pure EP), which is attributed to the PNMoS2 nanosheets that can generate the uniform lubricating transfer layer. The outstanding properties of EP nanocomposites are attributed to the coupled effects between PNMoS2 and Co–Bi ultrathin sheets with an enhanced interface interaction in the EP matrix. This study manifests the extensive application of well-designed PNMoS2@Co–Bi nanohybrids in the fire safety and wear resistance of polymers.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsanm.1c01999.Materials; preparation precursor of PNMoS2 nanosheets; synthesis of Co–Bi nanosheets grown on PNMoS2 (PNMoS2@Co–Bi); preparation of EP/PNMoS2@Co–Bi composites; characterization; SEM images of the fractured sections of EP composites; The TEM observation of the ultrathin sections obtained from EP/PNMoS2@Co–Bi composites; TGA data for EP and its composites in nitrogen; cone calorimeter data of EP and its composites; LOI and UL-94 data of EP and its nanocomposites; and absorbance of pyrolysis products for EP and its composites (PDF)This article has not yet been cited by other publications.

Emerging Advancements in Hybrid Molybdenum Disulfide Polymeric Nanoarchitectures and Multifunctional Applications

Flame retardant mechanisms of Montmorillonites, layered double hydroxides and molybdenum disulfide polymeric nanoarchitectures for safety in extreme environments

MoS<sub>2</sub>: Advanced Nanofillers for Polymer Nanocomposites

Phosphorus/Nitrogen-Codoped Molybdenum Disulfide/Cobalt Borate Nanostructures for Flame-Retardant and Tribological Applications

MoS2/Polymer Nanocomposites: Preparation, Properties, and Applications

Anomalous Nano-Barrier Effects of Ultrathin Molybdenum Disulfide Nanosheets for Improving the Flame Retardance of Polymer Nanocomposites

In Situ Fabrication of Molybdenum Disulfide Based Nanohybrids for Reducing Fire Hazards of Epoxy

Hierarchical MoS 2 /polyaniline binary hybrids with high performance for improving fire safety of epoxy resin

Surface Modification of Graphene with Layered Molybdenum Disulfide and Their Synergistic Reinforcement on Reducing Fire Hazards of Epoxy Resins

Epoxy composites with functionalized molybdenum disulfide nanoplatelet additives

In situ growth of polyphosphazene particles on molybdenum disulfide nanosheets for flame retardant and friction application

A Novel Phosphorus-Containing MoS2 Hybrid: Towards Improving the Fire Safety of Epoxy Resin.

The Effect of Defect-Rich Molybdenum Disulfide Nanosheets with Phosphorus, Nitrogen and Silicon Elements on Mechanical, Thermal, and Fire Behaviors of Unsaturated Polyester Composites

In situ synthesis, morphology, and fundamental properties of polymer/MoS 2 nanocomposites

Processable Dispersions of Graphitic Carbon Nitride Based Nanohybrids and Application in Polymer Nanocomposites

A new application of MoS2@AG@PA prepared by irradiation: Synergizing with magnesium hydroxide to enhance fire safety and other key properties of EVA composites

Recent Advances in Molybdenum Disulfide and Its Nanocomposites for Energy Applications: Challenges and Development

Construction of Multifunctional MoSe2 Hybrid Towards the Simultaneous Improvements in Fire Safety and Mechanical Property of Polymer.

Review—Next Generation 2D Material Molybdenum Disulfide (MoS2): Properties, Applications and Challenges

In Situ Growth of 0D Silica Nanospheres on 2D Molybdenum Disulfide Nanosheets: Towards Reducing Fire Hazards of Epoxy Resin.

Molybdenum disulfide nanostructures coupled with metal plasmonics for improved electronic and photonic performances