Abstract:Calcite is widely formed in various geological environments such as diagenesis, biological processes and hydrothermal processes. Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) calcite U-Pb dating technique has a broad application prospect in solving key geological problems. Calcite has relatively low U content (5.0x10(-6)) and high common lead proportion (U-238/Pb-206 < 1), which requires high sensitivity of the instrument. Compared with Q-ICP-MS and SF-ICP-MS, MC-ICP-MS has the advantage of simultaneous isotope determination and higher analysis accuracy. Predecessors optimized instrument parameters and made some attempts to improve sensitivity. To maximize sensitivity, based on Neptune Plus model MC-ICP-MS, this study gets the best sensitivity of U and Pb by optimizing cone and auxiliary nitrogen systematically. The research shows that the instrument has the highest sensitivity under the condition of Jet+X cone combined with nitrogen (N-2=4.0mL.min(-1)). Compared with the conventional condition (S+H cone combined without nitrogen), the signal intensities of U and Pb are increased by about 4 times and 3 times respectively. At the same time, we find that the nitrogen sensitization has a great relationship with the cone combination. When X sample cone is used, the introduction of nitrogen can improve the signal intensity of U, while when H sample cone is used, the introduction of nitrogen does not change the signal intensity. Based on the optimized instrument parameters, we established a high spatial resolution (similar to 85 mu m) LA-MC-ICP-MS calcite U-Pb dating technique. Three calcite U-Pb dating reference materials are used to verify our technique, and the results are consistence with ID-TIMS value within error, which proves that our method is effective for the analysis of low U (similar to 0.03x10(-6)) sample. Two reference materials in the laboratory are preliminary determined: TLM and LSJ07. The results of one measurement of TLM are 219.8 +/- 2.3Ma (2s, n=30), and the results of two measurements of LSJ07 are 26.4 +/- 0.2 Ma (2s, n=30) and 26.7 +/- 0.2Ma (2s, n=30). The proportion of common lead in these two reference materials is relatively low, and they are potential calcite U-Pb dating reference materials. We find that the change of laser spot size significantly affected the accuracy of the results, which may be related to the difference of fractionation effect under different laser spots, especially when the laser spot is smaller than 60 mu m. Therefore, we suggest that the laser parameters should be strictly matched between the reference materials and the unknown samples in the U-Pb dating of calcite. Finally, we preliminarily discussed the closure of calcite U-Pb system.

(NH 4 ) 2 CO 3 exchange reaction and double-spike MC-ICP-MS method for gypsum U-Th dating

Site-Directed and In-situ Dating Microbeam Techniques and Crystal Chemistry Microanalysis for U-Th-Pb Bearing Accesory Minerals

PXCG-1 and PXCG-2: two reference materials for gypsum U–Th dating

LA-MC-ICP-MS Calcite U-Pb Dating Technique

An Effective Method to Distinguish Between Artificial and Authigenic Gypsum in Marine Sediments

In situ calcite U−Pb geochronology by high-sensitivity single-collector LA-SF-ICP-MS

A novel in situ methodology for U–Pb, (U–Th)/He, and fission track triple dating

Study on Microwave Digestion of Gypsum for the Determination of Multielement by Icp-Oes and Icp-Ms

Arsenic uptake by gypsum and calcite: Modeling and probing by neutron and x-ray scattering

High-precision Double-Spike Sn Isotope Analysis of Geological Materials by MC-ICP-MS

In-situ Raman study and phase transition of gypsum under high pressure

In situ LA-ICPMS U–Pb dating of sulfates: applicability of carbonate reference materials as matrix-matched standards

Rapid determination of plutonium isotopes in small samples using single anion exchange separation and ICP-MS/MS measurement in NH3–He mode for sediment dating

In Situ Transmission Electron Microscopy Explores a New Nanoscale Pathway for Direct Gypsum Formation in Aqueous Solution

In situ LA-ICPMS U-Pb dating of Sulfatessulfates: Applicability of carbonate reference materials as matrix-matched standards

Matrix Effects of Calcium on High-Precision Sulfur Isotope Measurement by Multiple-Collector Inductively Coupled Plasma Mass Spectrometry

Simultaneous U–Pb and U–Th Dating Using LA-ICP-MS for Young (<0.4 Ma) Minerals: A Reappraisal of the Double Dating Approach

High precision potassium isotope analysis of geological samples using MC-ICP-MS

Co-precipitation approach to measure amount of $^{238}$U in copper to sub-ppt level using ICP-MS

Experimental Study and Mechanism Analysis of Preparation of α-Calcium Sulfate Hemihydrate from FGD Gypsum with Dynamic Method