Abstract:Effect of surface treatment on hybrid carbon/ramie epoxy composites. Hybrid polymer composites' lightweight, biodegradability, damping, and cost‐effectiveness have made them popular in recent decades. This study evaluated the raw and alkali‐treated hybrid composite's free vibration studies and mechanical properties by changing the ramie fiber layers (core) from two to four and keeping the carbon fiber layers (top and bottom) constant. Thus, to enhance the mechanical properties, the ramie fiber was treated prior with 2, 3, and 4 wt% of sodium hydroxide (NaOH). These composites were characterized chemically, mechanically, morphologically, and vibrationally via Fourier transform infrared spectroscopy, flexural and tensile tests, field emission scanning electron microscope, and free vibration setup, respectively. The tensile and flexural samples were loaded under quasistatic conditions and tested at 1 and 2 mm/min to evaluate tensile and flexural properties, respectively, and a free vibration test built the natural frequencies and reliable damping factor using clamped‐clamped and clamped‐free boundary conditions. Two layers of carbon fiber (exterior layer) and two layers of ramie fiber (core layer) at 3 wt% NaOH produced maximum tensile strength (523 MPa) and flexural modulus (68,869 MPa) among natural and hybrid composite combinations. This study shows that hybridization and alkaline treatment improve composite material mechanical properties in a specific ratio. Highlights Mechanical and vibration analysis of carbon/ramie hybrid composites was studied. Ramie fiber's surface treatment was carried out in NaOH at 2, 3, and 4 wt%. Surface treatment uplifts mechanical and vibration properties than untreated. Ramie fiber's chemical consequences were analyzed through Fourier transform infrared spectroscopy and field emission scanning electron microscope tests. Surface treatment at 3 wt% builds higher mechanical and vibrational properties.

Tensile and Bending Strength Analysis of Ramie Fiber and Woven Ramie Reinforced Epoxy Composite

Ramie Fiber Woven Composite: The Effect of Number of Layers of Woven Fibers on the Thrust Force in the Drilling Process

Characterisation of the woven fabric of jute, ramie and roselle for reinforcement material for polymer composite

Ramie natural fibre-reinforced biodegradable composites: mechanical, absorption and thermal behaviour study

Analysis of Tensile Strength and Water Absorption Properties of Glass-Ramie Hybrid Laminated Composite

Ramie Fiber Woven Composite: The Effect of Feedrate Variation on the Tensile Strength of the Open Hole in the Drilling

Evaluation of Mechanical and Thermal Properties of Jute and Ramie Reinforced Epoxy-based Hybrid Composites

An examining the static and dynamic mechanical characteristics of milled ramie root reinforced polyester composites

Preparation and characterization of ramie-glass fiber reinforced polymer matrix hybrid composites

Effect of Hybridization of Ramie Fibers on the Vibrational and Damping Responses of Ramie/Glass/Epoxy Resin Composite Laminates

Reinforcement of Polyester with Renewable Ramie Fibers

Effects of PLA-Type and Reinforcement Content on the Mechanical Behavior of Additively Manufactured Continuous Ramie Fiber-Filled Biocomposites

The static and dynamic mechanical properties analysis of ramie/carbon fiber‐reinforced composites

Grafting Ramie Fiber with Carbon Nanotube and Its Effect on the Mechanical and Interfacial Properties of Ramie/epoxy Composites

The Effect of Fibre Length and Content on Aloe Vera and Ramie Fibre-Reinforced Epoxy Hybrid Composite Properties

Fabrication of ramie/hemp fibers-reinforced hybrid polymer composite—A comprehensive study on biological and structural application

Physical and Mechanical Behavior of Ramie and Glass Fiber Reinforced Epoxy Resin-Based Hybrid Composites

Mechanical and vibrational study of raw and surface‐treated ramie fiber hybridized carbon fiber epoxy composites

Effect of Pineapple Leaf and Ramie Fiber Length and Weight Percentage on the Hybrid Polymer Composites Dry Sliding Wear and Air Jet Erosion Studies

Experimental Investigation of Bi-Directional Flax with Ramie Fibre-Reinforced Phenol-Formaldehyde Hybrid Composites

Flame retarding and reinforcing modification of ramie/polybenzoxazine composites by surface treatment of ramie fabric