Abstract:Electrification of aircraft is a very challenging task as the demand for energy and power is high. While the storage and generation of electrical energy are widely studied due to the limited specific energy and specific power of batteries and fuel cells, electric machines (power electronics and motors) which have years of experience in many industrial fields must be improved when applied to aviation: they generally have a high efficiency but the increase in power levels determines significant thermal loads which, unlike internal combustion engines (ICE), cannot be rejected with the exhaust. There is therefore a need for thermal management systems (TMSs) with the main objective of maintaining operating temperatures below the maximum level required by electric machines. Turboprop aircraft, such as the ATR 72 or the Dash 8-Q400, are commonly used for regional transport and are equipped with two gas turbine engines whose combined power is in the order of 4 MW. Electric and hybrid propulsion systems for these aircraft are being studied by several leading commercial aviation industries and start-ups, and the 1MW motor size seems to be the main option as it could be used in different aircraft configurations, particularly those that exploit distributed electric propulsion. With reference to the topics mentioned above, the present work presents the design of a TMS for a high-power motor/generator whose electrical architecture is known. Once integrated with the electrical part, the TMS must allow a weight/power ratio of 14 kW/kg (or 20 kW/kg at peak power) while maintaining the temperature below the limit temperature with reasonable safety margins. Submerged jet oil is the cooling technique here applied with a focus on diathermic oil. Parameters affecting cooling, like rotor speed and filling factor, are analysed with advanced CFD.

2-kV 1-MW 20,000-RPM Integrated Modular Motor Drive for Electrified Aircraft Propulsion

A Brushless DC motor design for an aircraft electro-hydraulic actuation system

A 5-Phase Fault-Tolerant Brushless Permanent Magnet Motor Drive for an Aircraft Thin Wing Surface Actuator

Flight verification of cooling self-sustaining high-temperature superconducting motor

Thermal Management of High-Power Density Electric Motors for Electrification of Aviation and Beyond

Cooling of 1 MW Electric Motors through Submerged Oil Impinging Jets for Aeronautical Applications

Characterization and Mitigation of Conducted Emissions in a SiC based Three-level T-Type Motor Drive for Aircraft Propulsion

Development of an Intelligent Electric Motor-Driven Pump with High Energy Efficiency

New Proposal of 80-Krpm High-Speed Surface-Mounted Permanent-Magnet Synchronous Motor

Large electric machines for aircraft electric propulsion

Multi-three-phase FSCW High-speed High-power-dense Inset Bread-loaf PMSM for the Electric VTOL Application

Fault-Tolerant Brushless DC Motor Drive for Electro-Hydrostatic Actuation System in Aerospace Application

Design and Analysis of a High Efficient Multi-Segment Redundancy Linear Motor

Mild hybridisation of turboprop engine with high-power-density integrated electric drives

Considerations on the Development of an Electric Drive for a Secondary Flight Control Electromechanical Actuator

Experimental Evaluation of an Electric Powertrain Designed for a 180-kw Turboelectric Aircraft Ground Test Rig

Optimal Design of High Specific Power Electric Machines for Fully Electric Regional Aircraft: A Case Study of 1MW S-PMSM

Design and Research on High Power Density Motor of Integrated Motor Drive System for Electric Vehicles

Design and Characteristic Analysis of an Axial Flux High-Temperature Superconducting Motor for Aircraft Propulsion

Overview of Integrated Electric Motor Drives: Opportunities and Challenges

Battery-Electric Powertrain System Design for the HorizonUAM Multirotor Air Taxi Concept