Abstract:Micro-characterized variables are proposed to precisely characterize a micro-V-grooved Si surface through the 3D measured topography rather than the designed one. In this study, level and gradient micro-grooved surfaces with depth of 25-80 mu m were precisely and smoothly fabricated using a new micro-grinding process rather than laser machining and chemical etching. The objective is to investigate how these accurate micro-characterized variables systematically influence anisotropic wetting and droplet self-movement on such regular micro-structured surfaces without surface chemical modification. First, the anisotropic wetting, droplet sliding, pinning effect and droplet impact were experimentally investigated; then, theoretical anisotropic wetting models were constructed to predict and design the anisotropic wetting. The experiments show that the level micro-V-grooved surface produces the anisotropic wetting and pinning effects. It not only approximates superhydrophobicity but also produces high surface free energy. Moreover, the gradient micro-V-grooved surface with large pitch may lead to much easier droplet sliding than the level one along the micro-groove. The droplet self-movement trend increases with increasing the micro-groove gradient and micro-V-groove ratio. The micro-groove pitch and depth also influence the droplet impact. Theoretical analyses show that the wetting anisotropy and the droplet anisotropy both reach their largest value and disappear for a sharp micro-groove top when the micro-V-groove ratio is equal to 0.70 and 2.58, respectively, which may change the wetting between the composite state and the non-composite state. It is confirmed that the wetting behavior may be designed and predicted by the accurate micro-characterized variables of a regular micro-structured surface.

Surface wettability analysis and preparation of hydrophobic microcylindrical arrays by μ-SLA 3D printing

Application of 3D printing for fabrication of superhydrophobic surfaces with reversible wettability

Superhydrophobic μ-pillars via simple and scalable SLA 3D-printing: the stair-case effect and their wetting models

Investigation and Application of an Ultrahydrophobic Hybrid-Structured Surface with Anti-Sticking Character

Construction of superhydrophobic surfaces via dual-scale modified particles and digital light processing 3D printing techniques

Anisotropic wetting properties on a precision-ground micro-V-grooved Si surface related to their micro-characterized variables

DESIGN AND FABRICATION OF SUPER-HYDROPHOBIC SURFACES ON SILICON WAFERS AND STUDY OF EFFECTS TO HYDROPHOBICITY

Design and Fabrication of Super-Hydrophobic Surface Based on Non-Silicon Micro Machining Technology

Making Superhydrophobic Surfaces with Microstripe Array Structure by Diffusion Bonding and Their Applications in Magnetic Control Microdroplet Release Systems

3D-Printed Bioinspired Cassie-Baxter Wettability for Controllable Microdroplet Manipulation

Controllable adhesive superhydrophobic surfaces based on PDMS microwell arrays

Preparation of a superhydrophobic aluminium alloy surface by UV laser

Adaptive wettability-enhanced surfaces ordered on molded etched substrates using shrink film

The Transitional Wettability on Bamboo-Leaf-like Hierarchical-Structured Si Surface Fabricated by Microgrinding

A Laser Scanning Method to Control the Location, Shape, Contact Angle and Sliding of Water Droplet on Superhydrophobic Surface

Selective laser melting of ink-printed (SLM-IP) copper (Cu) nanoparticles (NPs) for facile controllable fabrication of super-hydrophobic surface

Analysis and design of functional micro/nano structured surfaces

Light‐ and Heat‐Responsive Superhydrophobic Surfaces with Shape Memory Capacity Prepared by 4D Printing

Preparation of Hydrophobic Surface on PLA and ABS by Fused Deposition Modeling

Fabrication of Super-hydrophobic Surfaces for Microfluidic Chips