Abstract:Highlights • A dual phase β+α Mg-Li alloy was fabricated as reducing the Li content. • The dispersed α-Mg phases mitigate the dimension and distribution of eutectic I-Phase along grain boundaries. • The dual phase Mg-Li alloy exhibits enhanced ductility (elongation (EL) = 17.8 %) due to the improved deformation compatibility. • The continuity of slip between α-Mg and β-Li on plane pairs of {123}Li-{ 112 ̄2 }Mg and {112}Li-{ 112 ̄2 }Mg assures the deformation compatibility across interfaces. • Two strengthening mechanisms, nanoscale B2 (Li, Mg) 3 Zn-type precipitates and the microscale I-phase, are characterized. Mg-Li alloys with high lithium concentrations possess a lightweight body-centered cubic (BCC) matrix structure (β-Li). Interspersed eutectics (primarily the reticulated I-phase) often form along phase boundaries (PBs) and grain boundaries (GBs) which strengthen the alloy but cause the loss of ductility due to the brittle behavior of I-phase. By modifying the Li content, we fabricated the (β+α) biphase Mg-Li alloy in which the α-Mg phase with a hexagonal close-packed structure (HCP) is embedded in β-Li matrix, significantly increasing interface density. The high-density interfaces mitigate the distribution and dimension of the I-phase along GBs and PBs. The alloy exhibits enhanced ductility (elongation (EL) = 17.8 %) compared with the alloy without the α-Mg phase (EL = 5.1 %). Structural characterizations unveil the strengthening mechanism of the nanoscale B2 (Li, Mg) 3 Zn-type precipitates in conjunction with the microscale I-phase. The (Li, Mg) 3 Zn nanophases augment the yield and ultimate tensile strength of the alloy without a discernible compromise in ductility, predominantly due to gliding dislocations cutting through the precipitates. In contrast, the microscale I-phase presents a formidable barrier to dislocation motion, facilitating dislocation pileups at interfaces and culminating in diminished ductility across the interface. In-situ stretching techniques were employed to scrutinize the microstructural evolution of alloys during tensile deformation, elucidating that the deformation compatibility of alloys correlates with the average size of the I-phase and their distribution along GBs and PBs. Corresponding to the orientation relationship (OR) between the α-Mg and β-Li phases {110}Li//{0001}Mg and < 1 ̄11 >Li //< 112 ̄0 >Mg, the slip continuity between α-Mg and β-Li on plane pairs of {123}Li-{ 112 ̄2 }Mg and {112}Li-{ 112 ̄2 }Mg assures the deformation compatibility through facilitating the deformation across interfaces. Simultaneously, during the stretching process, the dispersed I-phase instigates the emergence of sporadic microcracks, indicating gradual damage evolution. These discoveries offer novel insights into achieving exceptional strength-ductility amalgamations in Mg-Li alloys through microstructural adjustments.

Role of Short-Range Order on Diffusion Coefficients in the Li-Mg Alloy

Fundamental Thermodynamic, Kinetic, and Mechanical Properties of Lithium and Its Alloys

Effect of Alloying Elements on the Short-Range Orders and Atomic Diffusion Behavior of Liquid Al−9Si Cast Alloys

Structure-Dynamics Relationship in Al-Mg-Si Liquid Alloys

A Multiscale, Dynamic Elucidation of Li Solubility in The Alloy And Metallic Plating Process

Significant roles of minor Mg addition in microstructural evolution and mechanical properties of cast Al–3Li–2Cu-0.15Zr alloy

Composition Dependence of Lithium Diffusion in Lithium Silicide: A Density Functional Theory Study

Study of the diffusion of Al–Li alloys subjected to an electric field

Effects of order-disorder transition on phase relationship, elastic strength, and mechanical anisotropy of Al-Li alloys

Dissolution and Diffusion Behavior of Solid Mn in Mg Melt

Interdiffusion and atomic mobility of the Mg-Ag-Zn system

A short review on diffusion coefficients in magnesium alloys and related applications

Enhancing the ductility of cast Mg-Li alloys via dispersed α-Mg phase mitigating the dimension and distribution of interspersed eutectics along grain boundaries

Physical metallurgy of aluminum-lithium alloys

Composition and Microstructure Dependent Corrosion Behaviour of Mg-Li Alloys

Chemical Ordering induced Strengthening in Lightweight Mg Alloys

Density Functional Theory Study of Diffusion of Lithium in Li–Sn Alloys

Interfacial Strain Effects on Lithium Diffusion Pathways in the Spinel Solid Electrolyte Li-Doped MgAl$_2$O$_4$

Solid-Solution or Intermetallic Compounds: Phase Dependence of the Li-Alloying Reactions for Li-Metal Batteries

The influence of Cu/Li ratio on precipitation in Al–Cu–Li–x alloys

Periodic linear complexions: Co-segregation of solutes at a low-angle grain boundary in a magnesium alloy