Abstract:The microstructure of Al-Cu-Li alloys is influenced by the alloying contents, which in turn affect the ultimate performance. This study examined the microstructure characteristics of Al-Cu-Li alloys with varying Li contents (1.05, 1.30, and 1.66 wt.%) in as-cast state, as well as microstructure evolution during homogenization treatments. The investigation employed a range of analytical techniques, including optical microscopy (OM), scanning electron microscopy (SEM), energy dispersive spectrometry (EDS), X-ray diffraction (XRD), differential scanning calorimeter (DSC), focused ion beam (FIB), transmission electron microscopy (TEM), and thermodynamic calculation software. The findings indicate that the eutectic phase exhibited significant variations with the Li content changing. Three distinct low-melting phases were identified in 1.05Li alloy, including Ag-containing Al 2 CuMg, Al 7 Cu 4 Li, and Al 2 Cu. As Li content was elevated to 1.30 wt.%, there was a noticeable drop in the quantities of Ag-containing Al 2 CuMg and Al 7 Cu 4 Li phases. Conversely, the Al 2 Cu phase increased, and a few Al 2 CuLi phases emerged. When the Li raised to 1.66 wt.%, an increased Al 2 CuLi phase was discovered, which existed along the dendritic edges. However, there were only little Ag-containing Al 2 CuMg phase, and no Al 7 Cu 4 Li phase detected. The initial melting temperatures for the four soluble eutectic phases were systematically arranged in the following order: Ag-containing Al 2 CuMg < Al 7 Cu 4 Li < Al 2 Cu < Al 2 CuLi. The elevated Li content resulted in a challenge of dissolution of the eutectic phases. Following 500°C/12h homogenization process, the containing-Ag Al 2 CuMg phase dissolved. Additionally, the Al 7 Cu 4 Li and Al 2 Cu phases were eliminated through subsequent 515°C/12h homogenization. In addition, the Al 2 CuLi phase was still existing.

Study of the diffusion of Al–Li alloys subjected to an electric field

Influence of homogenization treatment under an electric field on ductility of 2091 Al-Li alloy during hot rolling

Phase Field Simulation for Non-Isothermal Solidification of Multicomponent Alloys Coupled with Thermodynamics Database

Effect of solution treatment in an electric field on mechanical properties and microstructure of 2091 Al-Li alloy

The Effect of the Homogenization Treatment with an Electric Field on Second Phase Precipitation of 2091 Al-Li Alloy During Ageing Treatment

Effects of Electric Field Applied during Solution Treatment on Precipitation Kinetics in an Al-Li Alloy

Effect of homogenization treatment under an electric field on T1 distribution and mechanical properties of 2091 Al-Li alloy

Effect of Solution Treatment with Electric Field on Properties and Fracture Characters of Al-Li Alloys

Influence of enhanced Li content on the as-cast eutectic phase features and the evolution during homogenization of Al-Cu-Li alloys

The Solidification of Al–Cu Binary Eutectic Alloy with Electric Fields

Deformation behavior and formability of solid solution state Al–Li alloy in electromagnetic forming

The Effect of Solution Treatment on the Si Particles’ Morphology Evolution and the Thermal Conductivity and Tensile Properties of Sb-Modified Al-8Si-0.6Mg Alloys

High solid-solution strengthening mechanism of a novel aluminum-lithium alloy fabricated by electromagnetic near-net shape technology

The Effect of an Electric Field on the Mechanical Properties and Microstructure of Al–Li Alloy Containing Ce

Effect of Electric Field on Conductivity and Vickers Hardness of an Al-Li Alloy

Tailoring the heterophase interfacial structures to improve both strength and ductility of Al-Li alloys by fine tuning major solute Mg

Characterization of Al3Zr precipitation via double-step homogenization and recrystallization behavior after subsequent deformation in 2195 Al-Li alloy

Phase-field Study for the Influence of Solute Interactions on Solidification Process in Multicomponent Alloys

Enhancing Plasticity in BCC Mg-Li-Al Alloys Through Controlled Precipitation at Grain Boundaries

High-Temperature Phase Transformations in Al-Li-Cu-Mg-Zr-Sc Alloy Studied via In Situ Electron Microscopy

Distribution and Morphology of α-Al, Si and Fe-Rich Phases in Al-Si-Fe Alloys under an Electromagnetic Field