Abstract:The simulation of crack-induced failure is of vital importance for the safety and integrity assessment of solids and structures but still challenging. Being the foremost approach, fracture mechanics is plagued by the logical inconsistency in dealing with crack and non-cracked region, and to make matters worse, it has been contradicted by the ongoing experiments that the fracture energy is not a material constant irrelevant to geometry even for the unsophisticated situations. In this paper, based on the recently proposed nonlocal macro-meso-scale consistent damage (NMMD) model, it is demonstrated that the logical consistency of governing equations either on crack-tip or off crack-tip plays a crucial role in the complete solution of cracking problems. To this end, the central themes of fracture mechanics, including the definition of an idealized crack, the separated equilibrium laws and the cracking criteria attached to crack-tip, are firstly revisited. Then, after a concise description of NMMD model with emphasis on the geometrical transmission form micro- to macro-scale and the physical–mechanical translation from geometry to energy, it is theoretically proved that the geometry-based damage zone reproduces idealized crack as a limit when the nonlocal characteristic length, i.e., the influence radius in NMMD model, tends to zero. As a result, the separated equilibrium laws of fracture mechanics can be covered by NMMD model with a unified set of governing equations that does not distinguish between points at crack surface and at non-cracked region. This advantage permits NMMD model to be well-suited to analyze both crack-induced failure problems with and without pre-existing cracks in the absence of additional cracking criteria. In contrast, owing to its macro-meso-scale consistent feature, a new criterion for kinking angle of crack, the maximum stress intensity factor (SIF) of mode-I, can be derived from NMMD model. Some representative numerical examples are also presented to further confirm the above intrinsic link to fracture mechanics. In particular, the superiority of the NMMD model is demonstrated by capturing not only the non-constant fracture parameters (especially the fracture energy) but also the cracking initiation not from the pre-existing crack-tips, which are revealed by experimental results but contradict fracture mechanics. These investigations imply that the NMMD model could provide a potential avenue to understand when and how cracks nucleate and propagate based on a two-scale perspective.

Introducing a novel LLD-CMOD equivalence fracture model for quasi-brittle materials exposed to three-point bending

A Modified Coffin-Manson Model for Ultra-Low Cycle Fatigue Fracture of Structural Steels Considering the Effect of Stress Triaxiality

Evaluation of Main Code Models for Predicting Flexural Load-Bearing Capacity Against Intermediate Crack-Induced Debonding in Frp-Strengthened Rc Beams

Cohesive Cracking Simulation of Concrete Using Effective Modulus

Assesment of Main Models for Predicting Debonding Load-Bearing Capacity Against Intermediate Crack-Induced Debonding Failure in Frp-Strengthened Rc Beams

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

Determination of double- K criterion for crack propagation in quasi-brittle fracture, Part II: Analytical evaluating and practical measuring methods for three-point bending notched beams

A Cohesive Model-Based Nonlinear Discontinuous Deformation Analysis for Tensile Fracture in Geotechnical Materials

Towards Fully Automatic Modelling of the Fracture Process in Quasi-Brittle and Ductile Materials: a Unified Crack Growth Criterion

A Numerical Study of Crack Mixed Mode Model in Concrete Material Subjected to Cyclic Loading

Crack propagation modeling of strengthening reinforced concrete deep beams with CFRP plates

A discontinuous Galerkin / cohesive zone model approach for the computational modeling of fracture in geometrically exact slender beams

A discontinuous Galerkin/cohesive zone model approach for the computational modeling of fracture in geometrically exact slender beams

A simplified method for determining double-K fracture parameters for three-point bending tests

NUMERICAL SIMULATION OF FAILURE PROCESS OF THREE-POINT BENDING CONCRETE BEAM CONSIDERING HETEROGENEITY OF TENSILE STRENGTH AND POST-PEAK SOFTENING CURVE

New insights into fracture and cracking simulation of quasi-brittle materials based on the NMMD model

Fully-automatic Modelling of Cohesive Crack Growth Using a Finite Element–scaled Boundary Finite Element Coupled Method

A review on ductile fracture prediction of cracked/notched components: The distinct and simplifying roles of the equivalent material concept and fictitious material concept

Experimental investigation and modified calculation model of critical crack propagation length of concrete

Determination of double-Determination of double- K criterion for crack propagation in quasi-brittle fracture Part I: experimental investigation of crack propagation

The Loading Capacity of Three Point Bending Beam With the Resistant Force of Cohesive Crack