Abstract:Natural ventilation and the type of window used are closely related. Many works have already been done on identifying the window types that can enhance ventilation performance in residential buildings. However, window performance has been investigated either independently, without considering the interactive effects of other apertures (relative positions of windows and window orientations) or it has been examined based on very limited wind data sets. To fill this research gap, this study aims to evaluate the influence of window types on indoor ventilation performance of residential units in Hong Kong, taking into account the interactive effect and based on representative wind data sets. Air change per hour (ACH) was used to quantify natural ventilation. In this study, site measurement was conducted at a carefully selected residential unit to provide data for validation of the Computational Fluid Dynamics (CFD) settings. The validated settings were used for further CFD simulations. The Central Composite Design method and the Squeeze Theorem were used to determine the representative wind data sets. The Response Surface Regression method was used to develop a mathematical model for quantifying the interactive influence of different apertures on indoor ventilation and to enable quick estimation of ACH. The results lead to the conclusion that for all apertures, side hung (SH) window is the most effective design, followed in descending order by top hung (TH) window and sliding (SLD) window. The maximum achievable ACH for SH and TH windows were 124% and 97% higher than the SLD window. It was also found that if windows can be located only on the same side of a residential unit, SH windows and south facing TH windows should be preferred.

Numerical study of wind environment of a low-rise building with shading louvers: sensitive analysis and evaluation of cross ventilation

Impact of shading louvers on wind-driven single-sided ventilation in a multi-storey building

NUMERICAL SIMULATION OF WIND PRESSURES AND WIND ENVIRONMENT AROUND A COMPLEX-SHAPED HIGH-RISE BUILDING

NUMERICAL SIMULATION AND ANALYSIS OF WIND ENVIRONMENT AROUND BUILDING COMPLEX

Numerical Research of Layout Effect on Wind Environment Around High-Rise Buildings

Simulation and analysis of wind pressure distribution on low-rise buildings

Numerical Study of the Effect of Wall Opening on Wind Pressures on Low-Rise Gable-Roofed Buildings

Numerical study of wind-driven rain distribution on low-rise buildings with different roof styles

Numerical simulation of wind pressures on low-rise hip roofed buildings

The effect of louver blinds on the wind-driven cross ventilation of multi-storey buildings

NUMERICAL SIMULATION OF WIND LOADS AND WIND FLOW FIELD AROUND A SPHERICAL TALL BUILDING

Investigation of varying louver angles and positions on cross ventilation in a generic isolated building using CFD simulation

Simulation Study on the Effectiveness of Passive Natural-Ventilated Facade Devices for High-Rise Public Buildings

Improving Wind Environment of Residential Neighborhoods by Understanding the Relationship Between Building Layouts and Ventilation Efficiency

Numerical Investigation of Different Building Configurations for Improving Outdoor Spatial Ventilation Conditions in Strip-Type Residential Neighbourhoods

Numerical study on natural ventilation of the wind tower: Effects of combining with different window configurations in a low-rise house

Numerical simulation of wind pressures on low-rise building with gable roof

Numerical and Experimental Study on Flow Field around Slab-Type High-Rise Residential Buildings

Estimation model for natural ventilation by wind force considering wind direction and building orientation for low-rise building in China

Natural ventilation in buildings: measurement in a wind tunnel and numerical simulation with large-eddy simulation

Using response surface regression method to evaluate the influence of window types on ventilation performance of Hong Kong residential buildings