Abstract:Natural ventilation and the type of window used are closely related. Many works have already been done on identifying the window types that can enhance ventilation performance in residential buildings. However, window performance has been investigated either independently, without considering the interactive effects of other apertures (relative positions of windows and window orientations) or it has been examined based on very limited wind data sets. To fill this research gap, this study aims to evaluate the influence of window types on indoor ventilation performance of residential units in Hong Kong, taking into account the interactive effect and based on representative wind data sets. Air change per hour (ACH) was used to quantify natural ventilation. In this study, site measurement was conducted at a carefully selected residential unit to provide data for validation of the Computational Fluid Dynamics (CFD) settings. The validated settings were used for further CFD simulations. The Central Composite Design method and the Squeeze Theorem were used to determine the representative wind data sets. The Response Surface Regression method was used to develop a mathematical model for quantifying the interactive influence of different apertures on indoor ventilation and to enable quick estimation of ACH. The results lead to the conclusion that for all apertures, side hung (SH) window is the most effective design, followed in descending order by top hung (TH) window and sliding (SLD) window. The maximum achievable ACH for SH and TH windows were 124% and 97% higher than the SLD window. It was also found that if windows can be located only on the same side of a residential unit, SH windows and south facing TH windows should be preferred.

The effect of louver blinds on the wind-driven cross ventilation of multi-storey buildings

Impact of shading louvers on wind-driven single-sided ventilation in a multi-storey building

Flow field around a surface-mounted cubic building with louver blinds

The Influence of Exterior Louver Blinds’ Geometric and Thermal Attributes on the Convective Heat Transfer at Building Facades

Investigation on Forced Convective Heat Transfer at the Building Façade with Louver Blinds under Different Wind Directions

Numerical study of wind environment of a low-rise building with shading louvers: sensitive analysis and evaluation of cross ventilation

Investigation of varying louver angles and positions on cross ventilation in a generic isolated building using CFD simulation

A CFD study of convective heat transfer at an isothermal surface with horizontal louvers

Correlations for the Forced Convective Heat Transfer at a Windward Building Façade with Exterior Louver Blinds

Naturally ventilated double-skin façade with adjustable louvers

Field Measurement of Surface Temperature at Building Facade with Louver Blinds

Cross-ventilation of a generic building with various configurations of external and internal openings

Simulation Study on the Effectiveness of Passive Natural-Ventilated Facade Devices for High-Rise Public Buildings

Using response surface regression method to evaluate the influence of window types on ventilation performance of Hong Kong residential buildings

Numerical Investigation Of Wind-Driven Natural Ventilation Performance In A Multi-Storey Hospital By Coupling Indoor And Outdoor Airflow

The Effect of Balconies on Ventilation Performance of Low-rise Buildings

Evaluating the influence of openings configuration on natural ventilation performance of residential units in Hong Kong

Ventilation Characteristics and Performance Evaluation of Different Window-Opening Forms in a Typical Office Room

Research on the Effect of Different Position on Classroom Ventilation in a "L" Type Teaching Building

Numerical Investigation of Single-Sided Natural Ventilation Driven by Buoyancy and Wind Through Variable Window Configurations

Combined wind tunnel and CFD analysis for indoor airflow prediction of wind-driven cross ventilation