Abstract:The efficiency of heat transfer in air-cooled heat exchangers of various industrial facilities depends on the flow rate of the coolant, its inlet temperature and ambient temperature. These parameters are transient and depend both on the features of the technological process and on weather conditions. One option for a compact design of heat exchangers is the use of close-packed coils with a small bending radius. In this case, heat transfer in the complex geometry of the annular space cannot be described by simple one-dimensional dependencies. To solve this problem, it is necessary to consider the three-dimensional spatial structure of the heat exchange surface. Since the size of the grid elements will be several orders of magnitude less than the size of the facility, the size of the computational grids for CFD modeling full-scale heat exchangers will be billions of finite volumes, and even on powerful supercomputers, the solution time will be about a month. One way to reduce computational costs is to use reduced order models, in which the computational domain is not modeled directly; instead, simplified models, such as a porous medium model, are used to describe it. However, such models require additional closing relations and coefficients that characterize the actual channel geometry. This paper presents a technique for creating a digital twin of a heat exchanger with small bend radius coils based on a porous medium model. The values of heat transfer coefficients and hydraulic resistance depend on the speed of air movement in the space between the coils. The calculated value of the thermal power obtained using the strengthened model was 529 kW, which corresponds to the passport data of 500 kW, with less than 6% deviation for the heat exchanger under study. This confirms the correctness of the calculation with accepted simplifications. The calculation time in this case was only a few minutes when using a personal computer. The developed numerical model allows for the resolution of performance characteristics based on the temperature of the cooled medium at the inlet, air temperature, and fan speed. Analyzing the different modes of turning on the cooling fans made it possible to determine the values of the thermal power when turning off the fans or reducing the number of revolutions.

CFD methodology for predicting thermal plume from heat source: Experimental validation and simplified model

Application of Particle Image Velocimetry and Computational Fluid Dynamics Methods for Analysis of Natural Convection over a Horizontal Heating Source

Assessment Of Radiative Heat Transfer Impact On A Temperature Distribution Inside A Real Industrial Swirled Furnace

CFD Modeling of Heat Exchanger with Small Bent Radius Coils Using Porous Media Model

A comprehensive heat transfer prediction model for tubular moving bed heat exchangers using CFD-DEM: Validation and sensitivity analysis

CFD Calculation of Natural Convection Heat Transmission in a Three-Dimensional Pool with Hemispherical Lower Head

CFD Investigating Flow and Heat Transfer Characteristics in a Natural Circulation Loop

Validation of Continuous Conjugate Heat Transfer Model through Experimental Data

Numerical Simulation of Temperature and Carbon Dioxide Distribution in Indoor Environment Using Two-Equation Turbulence Models

Numerical Simulation Of Heat And Mass Transfer In Air-Water Direct Contact Using Computational Fluid Dynamics

Validation of CFD Model for Research into Displacement Ventilation

Experimental and numerical study of the flow dynamics and thermal behavior inside a car cabin: Innovative air diffusers and human body plumes interactions

Numerical Simulation of Natural Convection Heat Transfer for Annular Elliptical Finned Tube Heat Exchanger with Experimental Data

Numerical Modeling and Experimental Validation of Heat Transfer and Flow Resistance on the Shell Side of a Shell-and-tube Heat Exchanger with Flower Baffles

Experimental validation of a CFD model of a ground heat exchanger with slinky coils

Multiscale Computational Fluid Dynamics Methodology for Predicting Thermal Performance of Compact Heat Exchangers

CFD boundary conditions for contaminant dispersion, heat transfer and airflow simulations around human occupants in indoor environments

Performance assessment of turbulence models in CFX for predicting heat transfer of supercritical water

Appropriate CFD Turbulence Model for Improving Indoor Air Quality of Ventilated Spaces

Experimental Study and Numerical Models Assessment of Turbulent Mixed Convection Heat Transfer in A Vertical Open Cavity

Improving thermal model predictions for naturally ventilated buildings using large eddy simulations