Abstract:Fiber reinforced composite sandwich structures have wide applications in reducing the weight of high-speed aircrafts due to their processibility and high specific performance. It is of great significance for the safety to study the failure mechanism of composite sandwich structures under the ballistic impact and improve the structural impact resistance. However, the previous researches mainly focus on the performance of the hybrid sandwich structures with foam cores or metal grid cores. The main novelty of this study is to investigate the ballistic impact resistance of a composite composite sandwich panel with the fiber reinforced X-frame cores by using the projectile impact tests and numerical simulations. The impact resistance of this integrally molded fiber reinforced cores is less reported and is expected to be superior than that of the common aluminum, polymer and foam cores. For comparison, the carbon fiber composite cross-ply laminates with the identical areal density and the foam reinforced sandwich panels with the X-frame are tested. The experimental results indicate that the ballistic limit of the X-frame sandwich panel is similar to that of its equivalent laminate under the normal projectile penetration. Filling foams increase the structural ballistic limit velocity and energy absorbing amount by 18.2% and 33.9%, respectively. The widest range of fiber breakage and delamination on the sandwich panel observed appear at impact velocities approaching the ballistic limit, while the local damage is found under the high-speed perforation. The numerical results indicate that the projectile kinetic energy dissipated by the X-frame core accounts for over 50% of the total under the normal impact and the core has the better specific energy absorption capacity than the skins. The impact oblique angle and impact position are found to have a significant effect on the impact resistance of the X-frame sandwich panel through the numerical calculations.

Investigation on the mechanical properties and ballistic behaviors of sandwich structure of CFRP and biomimetic tendon plates with aramid filaments bundle

Impact response and damage evolution of triaxial braided carbon/epoxy composites. Part I: Ballistic impact testing

Investigation of the mechanical and ballistic properties of hybrid carbon/ aramid woven laminates

Study on Absorbing Energy Character of Functionally Graded Plate of GFRP/CFRP

Design and Ballistic Performance of Hybrid Plates Manufactured from Aramid Composites for Developing Multilayered Armor Systems

Low-velocity Impact Damage Research on CFRPs with Kevlar-fiber Toughening

Study on the enhancement mechanism of ballistic properties of shear thickening fluid impregnated aramid fabric composite plates

Influence of Fabric Structure of Aramid-Reinforced Polycarbonate Composites on Its Ballistic Resistance Verified by Experiment and Simulation

Anti-ballistic properties of hybrid UHMWPE fiber-reinforced composite armour

Hybridization Effects on Ballistic Impact Behavior of Carbon/ Aramid Fiber Reinforced Hybrid Composite

Ballistic Performance of B4C/STF/Twaron Composite Fabric

The Ballistic Performance of Aramid Composite Materials

Analysis of ballistic performance and penetration damage mechanisms of aramid woven fabric reinforced polycarbonate composites with different matrix content

Mechanical analysis and bionic improvement on buckling of CFRP tubes with high energy absorption capacity

The ballistic performance of STF impregnated Kevlar fabric coating GFRP composite structure

Braided-textile reinforced thin-walled conical tubular structures: Designing, manufacturing and testing

High‐velocity impact resistance and energy absorption behavior of Carbon‐Kevlar hybrid composite laminates

The Investigation and Fabrication of Novel Ballistic Composites with Checkerboard-Shaped Lay-Up Design to Improve Ballistic Performances

Experimental and numerical study on the ballistic impact resistance of the CFRP sandwich panel with the X-frame cores

Manufacture of braided-textile reinforced multi-walled tubular structures and axial compression behaviors

Effect of Fiber Fraction on Ballistic Impact Behavior of 3D Woven Composites