Abstract:Unraveling the microstructural heterogeneity is an important issue to understand the physical and mechanical properties of metallic glasses. Structural relaxation below the glass transition temperature Tg and cold rolling at ambient temperature are effective ways to tune the state within the potential energy landscape of metallic glasses, modifying the microstructural heterogeneity. With the help of nanoindentation technique, by scrutinizing the local reduced modulus and hardness of a typical Zr50Cu40Al10 metallic glasses in different energy states (from structural relaxed state to rejuvenated state), we demonstrate that the enhancement of microstructural heterogeneity plays an important role in tailoring the mechanical behavior. The internal friction coefficient is obtained by fitting the experimental load-displacement curves with finite element simulation. It is found that internal friction coefficient decreases with the increase of concentration of flow defects. The stress exponent obtained from the creep stage shows a strong dependence on the structural state of metallic glasses. Effects of structural relaxation and rejuvenation on the structural state are rationalized in terms of the relative flow defects concentration. Finally, the statistics of discrete displacement bursts during the deformation process were probed. We find that the displacement bursts behavior is sensitive to the structural energy state (microstructural heterogeneity). The displacement bursts phenomenon changes from obvious (relaxed state) to unapparent behaviors (rejuvenated state). By given a physical schematic, the correlation between the displacement bursts size and the shear band size in the local plastic zones is well established, which will lead to a deeper understanding of the rejuvenation-induced plasticity of metallic glasses.

Understanding the tensile fracture of deeply-notched metallic glasses

Tensile fracture morphologies of bulk metallic glass

Unraveling the microstructural heterogeneity and plasticity of Zr<sub>50</sub>Cu<sub>40</sub>Al<sub>10</sub> bulk metallic glass by nanoindentation

On the Notch Sensitivity of CuZr Metallic Glasses

Origin of Anomalous Inverse Notch Effect in Bulk Metallic Glasses

Necking and Notch Strengthening in Metallic Glass with Symmetric Sharp-and-deep Notches

A Model on the Coupling Between Cyclic Fatigue and Microstructure Evolution in a Metallic Glass

Strain-hardening and failure mechanisms of metallic glasses under triaxial stress

Notch Effect on Plastic Deformation of Metallic Glass: A Numerical Study by Revised Free-Volume Theory

Numerical Determination of Critical Configuration for Mechanical Properties of Metallic Glasses with Notches

Tensile Fracture Criterion of Metallic Glass

Fracture behavior and deformation-induced structure changes of a Ti-based metallic glass using micro-sized cantilevers

The Shear Band Controlled Deformation in Metallic Glass: A Perspective from Fracture

Notch Strengthening in Nanoscale Metallic Glasses

Fatigue Damage Mechanism Analyses of Oriented Sheets of Polymethyl Methacrylate Glasses

Notch Fatigue Behavior: Metallic Glass Versus Ultra-High Strength Steel

Effect of notch depth on the mechanical behavior of Cu50Zr50 metallic glasses revealed by molecular dynamics simulations

Enhanced Plastic Deformation in a Metallic Glass Induced by Notches

Deformation mode transition induced by notch sensitivity in metallic glass

Correlations among Atomic Mobility, Microstructure and Local Stress of Shear Bands and Necking Regions in Notched Cu50Zr50 Metallic Glasses

A non-viscous-featured fractograph in metallic glasses