Abstract:The size dependence of ductile to brittle transition of Zr-based metallic glasses was systematically investigated by small punch test. It was found that the metallic glasses with thickness ranging from 50 to 700 μm displayed an obvious transition from ductility to brittleness. Compared with thick samples, thin samples exhibit higher strength and better plasticity, which is attributed to the size-dependent transformation from soft state to hard state dominated by the deformation factor (<math>α=τ/σ</math>). Specifically, two significant transitions in deformation behavior at sample thickness of 200 and 500 μm are attributed to two critical deformation factors of <math>αc1</math> and <math>αc2</math>, which are responsible for the initiation of circumferential and radial shear bands, respectively. Specifically, only several micro-cracks can be observed on sample surface with <math>α≤αc2</math>. While <math>αc1≥α≥αc2</math>, multiple radial shear bands are activated and uniformly distributed on the sample surface. Further, when <math>α≥αc1</math>, multiple circumferential shear bands primarily initiate under high shear stress and large number of radial and circumferential shear bands can be observed on sample surface. The initiation and interaction of multiple radial and circumferential shear bands significantly enhance the ductility of the samples with <math>α≥αc1</math>.

On the Notch Sensitivity of CuZr Metallic Glasses

Effect of notch depth on the mechanical behavior of Cu50Zr50 metallic glasses revealed by molecular dynamics simulations

Notch Strengthening in Nanoscale Metallic Glasses

Origin of Anomalous Inverse Notch Effect in Bulk Metallic Glasses

Deformation mode transition induced by notch sensitivity in metallic glass

Understanding the tensile fracture of deeply-notched metallic glasses

Inverse size effects in un-notched and notched metallic glass thin films

In situ study on the bending strain field of a Zr-based bulk metallic glass with notch

Strain-hardening and failure mechanisms of metallic glasses under triaxial stress

Strength Softening at Shear Bands in Metallic Glasses

The Size-Dependent Non-Localized Deformation in A Metallic Alloy

Notch Effect on Plastic Deformation of Metallic Glass: A Numerical Study by Revised Free-Volume Theory

Serration Behavior of A Zr-Based Metallic Glass under Different Constrained Loading Conditions

Relationship of Deformation Mode with Strain-Dependent Shear Transformation Zone Size in Cu-Zr Metallic Glasses Using Molecular Dynamics Simulations

Effect of aspect ratio on the mechanical properties of metallic glasses

Numerical Determination of Critical Configuration for Mechanical Properties of Metallic Glasses with Notches

Size Effects on Tensile and Compressive Strengths in Metallic Glass Nanowires

Size dependence of ductile to brittle transition of Zr-based metallic glasses under multiaxial loading

Fracture behavior and deformation-induced structure changes of a Ti-based metallic glass using micro-sized cantilevers

Effect of the atomic construction and preparation procedure on the deformation behaviour of CuZr metallic glasses

Cyclic Deformation in Metallic Glasses.