Abstract:Advanced nuclear power plants are well-positioned for future zero-carbon grids, however, the need for flexible power generation will be required over the traditional emphasis on baseload generation for meeting historical demands. To achieve such flexibility, this work examines viable configurations for coupling nuclear energy production with thermal energy storage. Previous designs on nuclear-thermal energy storage configurations for advanced reactor designs, which utilized reactor steam as the heat source for charging the thermal energy storage, are restricted by the heat diversion ratio and efficiency losses, thus their impacts can be limited. In this context, this study proposes configurations for fully decoupling the nuclear reactor from the power cycle and positioning the storage as an intermediate loop, thereby achieving an unconstrained heat diversion ratio and improved efficiency. Compared with a standard high-temperature gas-cooled reactor's power cycle, steady-state thermodynamic modeling and dispatch optimizations quantify the benefits of a steam reheat cycle within the fully decoupled thermal energy system to separate the plant cycle from the high-pressure primary side. These benefits are further detailed, compatible with required high-temperature and high-pressure conditions, through (1) open-source dynamic transient models that examine the impact of off-design operation on the systems, (2) the investigation of components design and costing and finally (3) sizing and dispatch optimization. The fully-decoupled design achieves a cycle efficiency of 43.1%, an enhancement over the vendor's standard efficiency of 42.2% (Xe-100 design). The proposed design offers strengthened physical barriers from the nuclear island as well as superior operational flexibility and power boosting. Dispatch optimization and market analysis reveal that thermal energy storage size is highly dependent on the peak patterns of electricity prices and the minimum generation level constraint imposed on the balance of plant. Evaluation of off-design operation demonstrates that the full decoupling design with the suggested fail-safe control mechanisms ensures a minimal impact on reactor parameters, even during rapid power ramping.

A system for plant-wide multi-channel backup of nuclear power plant auxiliaries

Model Simplification of Nuclear Power Plant for Power System Dynamic Simulation

Coordinated protection and control between largecapacity nuclear power plants and power grids

ANALYSIS ON THE PERFORMANCE OF COMPOSITE HEAT-ACCUMULATION AND POWER-GENERATION TECHNOLOGY IN THERMAL POWER PLANT

Efficiency of Using the Auxiliary Boiler for Peak Power Generation by a Steam Turbine of NPP

Design and optimization of flexible decoupled high-temperature gas-cooled reactor plants with thermal energy storage

A novel system for reducing power plant electricity consumption and enhancing deep peak-load capability

Analyses of the Control System Strategies and Methodology for Part Power Control of the Simple and Intercooled Recuperated Brayton Helium Gas Turbine Cycles for Generation IV Nuclear Power Plants

Assessment of the working life of turbine blades and discs under cyclic loads conditions with hydrogen overheating of the steam in the steam turbine cycle of NPP

Efficiency and economic assessment of combining nuclear power plants with multifunctional heat accumulation systems

The concept of autonomous hydrogen energy complex: Adaptation of large nuclear power units to uneven energy consumption schedules

Availability monitoring and improvement method for in-service nuclear power plants based on high-precision prediction of availability

Digital twin-driven intelligent maintenance decision-making system and key-enabling technologies for nuclear power equipment

Imperfect Maintenance Scheduling for High Pressure Feedwater Heater System in Nuclear Power Plant

Improving nuclear power plant safety through independent water storage systems

Real-time simulations to enhance distributed on-line monitoring and fault detection in Pressurized Water Reactors

Investigation of System Responses of the Maanshan Nuclear Power Plant to the Loss of Residual Heat Removal During Midloop Operation Using a RELAP5/MOD3 Simulation

Predictive maintenance system for high-end equipment in nuclear power plant under limited degradation knowledge

A Reduced-Order Model of a Nuclear Power Plant with Thermal Power Dispatch

Enhanced Flexibility of PWRs (Mode A) Using an Efficient NMPC-Based Boration/Dilution System

The Research of Steam Generator Thermal Performance Degradation in Nuclear Power Plant