High-efficiency electrochemical removal of Cd(II) from wastewater using birnessite-biochar composites: Performance and mechanism

Yi Wang,Shiwei Lin,Lihu Liu,Feng Wang,Xiong Yang,Guohong Qiu

DOI: https://doi.org/10.1007/s10661-023-11169-x

IF: 3.307

2023-04-12

Environmental Monitoring and Assessment

Abstract:Birnessite has been widely used for electrochemical removal of heavy metals due to its high pseudocapacitance. Incorporation of carbon-based materials into birnessite can enhance its conductivity and stability, and synergistically improve the electrochemical adsorption capacity due to the double-layer capacitor reaction derived from carbon-based materials. In this study, biochar was successfully incorporated with birnessite at various ratios to synthesize composites (BC-Mn) for effective electrochemical removal of cadmium (Cd(II)) from water. The effects of cell voltage, initial pH, and recycling performance of BC-Mn were evaluated. As a result, the electrosorption capacity of BC-Mn for Cd(II) exhibited gradual increases with increasing birnessite content and reached equilibrium at a Mn content of 20% (BC-Mn20). The Cd(II) adsorption capacity of BC-Mn20 rose at higher cell voltage, and reached the maximum at 1.2 V. At pH 3.0–6.0, the electrosorption capacity initially rose until pH 5.0 and then approached equilibrium with a further increase in pH value. The Cd(II) electrochemical adsorption capacity of BC-Mn20 in the solution could reach 104.5 mg g −1 at pH 5.0 for 8 h at 1.2 V. Moreover, BC-Mn20 exhibited excellent reusability with a stability of 95.4% (99.7 mg g −1 ) after five cycles of reuse. Due to its superior heavy metal adsorption capacity and reusability, BC-Mn20 may have a promising prospect in the remediation of heavy metal polluted water.

environmental sciences