Abstract:The activities aimed at reducing the safety hazard in lithium batteries have successfully considered the replacement of the conventional, volatile and flammable carbonate-based, liquid electrolytes with more stable polymer electrolytes, obtained in the form of free standing membranes. With respect to other solid polymer electrolytes, such as those based on poly(ethylene oxide), gelled polymer electrolytes (GPEs) have the great advantage of offering high conductivity, i.e. of the order of 10 −3 S cm −1 , over a wide temperature range, combined with a large electrochemical stability, i.e. extending up to 5V versus Li + /Li [1-3]. Poly(vinylidene fluoride) (PVdF)-based, gel-type membranes have been widely investigated as Li-conducting systems and prepared by conventional solvent-casting procedures [4] or electro-spinning techniques [5]. In this work we report on originally developed, PVdF-based GPEs obtained by in-situ formation of the gel matrix during cell assembly, followed by a lithium salt infiltration step [6]. Particular emphasis was devoted to the study and the optimization of the GPE composition. The substitution of the commonly used LiPF 6 salt with the fluorine free, bis(oxalato)borate (LiBOB) was investigated. A detailed thermal and dynamical mechanical characterization was adopted to elucidate the properties of the proposed systems over a wide temperature range. Vibrational spectroscopy revealed interesting molecular interactions among components, mainly. polymer and salt, strongly affecting the stability of the membranes. The electrochemical investigation confirmed high ionic conductivity, a controlled interfacial resistivity versus lithium metal and a good electrochemical stability window. The feasibility of the in-situ gelled, PVdF-based polymer electrolyte containing the LiBOB salt was demonstrated by successful galvanostatic cyclations of the quoted membrane in different lithium-ion cell configurations, obtained by coupling a Sn-C alloying anode with an high voltage spinel or a LiFePO 4 cathode. Acknowledgments The results of this work have been obtained by the financial support of the European Community within the Seventh Framework Programme APPLES (Advanced, High Performance, Polymer Lithium Batteries for Electrochemical Storage) Project (contract number 265644). References [1] F. Croce, G.B. Appetecchi, L. Persi, B. Scrosati, Nature 394 (1998) 456. [2] G.B. Appetecchi, P. Romagnoli, B. Scrosati, Electrochem. Commun. 3 (2001) 281. [3] J. Hassoun, S. Panero, P. Reale, B. Scrosati, Adv. Mater. 2 (2009) 4807. [4] J. Hassoun, P. Reale, Bruno Scrosati, J. Mater. Chem. 17 (2007) 3668. [5] F. Croce, M.L. Focarete, J. Hassoun, I. Meschinia, B. Scrosati, Energy Environ. Sci. 4 (2011) 921. [6] L. Lombardo, M. A. Navarra, S. Panero, L. Aguilera Medina, A. Matic, J. Hassoun, J. Power Sources, 245 (2014) 232.

A Novel Approach for Development of Stable Quasi‐Solid Li‐O2 Batteries: Assembly and Performances of Double Layer Gel Polymer Electrolytes

A quasi-solid polymer electrolyte initiated by two-dimensional functional nanosheets for stable lithium metal batteries

In Situ Thermal Polymerization of a Succinonitrile-Based Gel Polymer Electrolyte for Lithium-Oxygen Batteries.

Optimizing Li‐ion Solvation in Gel Polymer Electrolytes to Stabilize Li‐Metal Anode

Excellent Electrolyte-Electrode Interface Stability Enabled by Inhibition of Anion Mobility in Hybrid Gel Polymer Electrolyte Based Li–O2 Batteries

(Digital Presentation) H-BN Enhanced Gel Polymer Electrolyte for Solid State Li-Ion Batteries

(Digital Presentation) Long Cycle Life Li-Ion Batteries Using Solidified Gel Electrolyte Prepared Via in-Situ Crosslinking

An in situ gel electrolyte for the facile preparation of high‐safety Li‐S battery

In-Situ gelled Polymer Electrolytes for Advanced Lithium Ion Batteries

Dendrite-Free Solid-State Li–O2 Batteries Enabled by Organic–Inorganic Interaction Reinforced Gel Polymer Electrolyte

Dendrite-Free Solid-State Li Metal Batteries Enabled by Bifunctional Polymer Gel Electrolytes

Flexible, Flame-Resistant, and Dendrite-Impermeable Gel-Polymer Electrolyte for Li-O 2 /Air Batteries Workable Under Hurdle Conditions.

Metal–Organic Framework-Supported Poly(ethylene oxide) Composite Gel Polymer Electrolytes for High-Performance Lithium/Sodium Metal Batteries

Anion-Immobilized Gel Polymer Electrolyte with a High Ion Transference Number for High-Performance Lithium/Sodium Metal Batteries

Regulating the Solvation Shell Structure of Lithium Ions for Smooth Li Metal Deposition in Quasi-Solid-State Batteries

An Advanced Gel Polymer Electrolyte for Solid-State Lithium Metal Batteries

An efficient gel polymer electrolyte for dendrite-free and long cycle life lithium metal batteries

Garnet/polymer solid electrolytes for high-performance solid-state lithium metal batteries: The role of amorphous Li2O2

3D Porous Garnet/Gel Polymer Hybrid Electrolyte for Safe Solid-State Li–O2 Batteries with Long Lifetimes

A new type of LATP doped PVDF-HFP based electrolyte membrane with flame retardancy and long cycle stability for solid state batteries

Advancing Lithium Battery Performance through Gel Electrolytes: Investigating EC-Based Blends with HNBR and PEC for Enhanced Conductivity