Abstract:The activities aimed at reducing the safety hazard in lithium batteries have successfully considered the replacement of the conventional, volatile and flammable carbonate-based, liquid electrolytes with more stable polymer electrolytes, obtained in the form of free standing membranes. With respect to other solid polymer electrolytes, such as those based on poly(ethylene oxide), gelled polymer electrolytes (GPEs) have the great advantage of offering high conductivity, i.e. of the order of 10 −3 S cm −1 , over a wide temperature range, combined with a large electrochemical stability, i.e. extending up to 5V versus Li + /Li [1-3]. Poly(vinylidene fluoride) (PVdF)-based, gel-type membranes have been widely investigated as Li-conducting systems and prepared by conventional solvent-casting procedures [4] or electro-spinning techniques [5]. In this work we report on originally developed, PVdF-based GPEs obtained by in-situ formation of the gel matrix during cell assembly, followed by a lithium salt infiltration step [6]. Particular emphasis was devoted to the study and the optimization of the GPE composition. The substitution of the commonly used LiPF 6 salt with the fluorine free, bis(oxalato)borate (LiBOB) was investigated. A detailed thermal and dynamical mechanical characterization was adopted to elucidate the properties of the proposed systems over a wide temperature range. Vibrational spectroscopy revealed interesting molecular interactions among components, mainly. polymer and salt, strongly affecting the stability of the membranes. The electrochemical investigation confirmed high ionic conductivity, a controlled interfacial resistivity versus lithium metal and a good electrochemical stability window. The feasibility of the in-situ gelled, PVdF-based polymer electrolyte containing the LiBOB salt was demonstrated by successful galvanostatic cyclations of the quoted membrane in different lithium-ion cell configurations, obtained by coupling a Sn-C alloying anode with an high voltage spinel or a LiFePO 4 cathode. Acknowledgments The results of this work have been obtained by the financial support of the European Community within the Seventh Framework Programme APPLES (Advanced, High Performance, Polymer Lithium Batteries for Electrochemical Storage) Project (contract number 265644). References [1] F. Croce, G.B. Appetecchi, L. Persi, B. Scrosati, Nature 394 (1998) 456. [2] G.B. Appetecchi, P. Romagnoli, B. Scrosati, Electrochem. Commun. 3 (2001) 281. [3] J. Hassoun, S. Panero, P. Reale, B. Scrosati, Adv. Mater. 2 (2009) 4807. [4] J. Hassoun, P. Reale, Bruno Scrosati, J. Mater. Chem. 17 (2007) 3668. [5] F. Croce, M.L. Focarete, J. Hassoun, I. Meschinia, B. Scrosati, Energy Environ. Sci. 4 (2011) 921. [6] L. Lombardo, M. A. Navarra, S. Panero, L. Aguilera Medina, A. Matic, J. Hassoun, J. Power Sources, 245 (2014) 232.

(Digital Presentation) Long Cycle Life Li-Ion Batteries Using Solidified Gel Electrolyte Prepared Via in-Situ Crosslinking

(Digital Presentation) Post-Treatment Study on Blended Polymer for Solid-State Lithium Batteries

Advancing Lithium Battery Performance through Gel Electrolytes: Investigating EC-Based Blends with HNBR and PEC for Enhanced Conductivity

In-situ Crosslinked Gel Polymer Electrolytes Based on Ionic Monomers as Charge Carriers for Lithium-Ion Batteries

In-Situ gelled Polymer Electrolytes for Advanced Lithium Ion Batteries

Molecular Crowding Solid Polymer Electrolytes for Lithium Metal Battery by In Situ Polymerization

Enabling 4.5 V Solid Polymer Batteries Through a 10 Μm, Crosslinked Polyether Electrolyte

Crosslinked Gel Polymer Electrolyte from Trimethylolpropane Triglycidyl Ether by In Situ Polymerization for Lithium-Ion Batteries

Dendrite-Free Solid-State Li Metal Batteries Enabled by Bifunctional Polymer Gel Electrolytes

Molecular engineering of a gel polymer electrolyte via in-situ polymerization for high performance lithium metal batteries

Multifunctional Polymer Bottlebrush-Based Gel Polymer Electrolytes for Lithium Metal Batteries

In Situ Polymerization Of Methoxy Polyethylene Glycol (350) Monoacrylate And Polyethyleneglycol (200) Dimethacrylate Based Solid-State Polymer Electrolyte For Li-Ion Batteries

A Three-Dimensional Co-Continuous Network Structure Polymer Electrolyte with Efficient Ion Transport Channels Enabling Ultralong-Life All Solid-State Lithium Metal Batteries

In-situ generated solid-state electrolytes with intimate interface affinity enable conductivity and high performances for lithium–ion batteries

Strategic Structural Design of a Gel Polymer Electrolyte toward a High Efficiency Lithium-Ion Battery

Quasi-Gel Polymer Electrolyte Interfaced with Electrodes through Solvent-Swollen Poly(ethylene oxide) for High-Performance Lithium/Lithium-Ion Batteries

Solvent-free In-Situ Polymerized Plastic Crystal Electrolytes for Long-Cycling Lithium Metal Batteries

(Digital Presentation) H-BN Enhanced Gel Polymer Electrolyte for Solid State Li-Ion Batteries

In-Situ Synthesized Gel Polymer Electrolyte Enable High Capacity and Long-Cycle-Life Lithium Metal Batteries

Synthesis and Characterization of Gel Polymer Electrolyte Based on Epoxy Group via Cationic Ring-Open Polymerization for Lithium-Ion Battery

Tuning the Properties of a UV-Polymerized, Cross-Linked Solid Polymer Electrolyte for Lithium Batteries