Abstract:In Northwestern China, the Ming Great Wall generally involves multiple layers of rammed earth, and rammed pits with regular spatial characteristics are always distributed on the horizontal interfaces between rammed layers. Obviously, the spatial regularity of rammed pits cannot only reflect the level of ramming technique in the Ming dynasty, but also control the geotechnical properties of rammed layer interfaces (RLIs). Hence, in the present study, one typical RLI with visible rammed pits was obtained from the Ming Great Wall in Yongchang County, Northwestern China, and the corresponding point cloud data were collected by 3D scanning technique. Then, this RLI was reconstructed using numerous micro slopes in ArcGIS, and the distribution maps of micro-slope heights, angles, plan curvatures and profile curvatures were produced as well. Based on these distribution maps and Random Forest (RF) algorithm, those micro slopes which can reflect the true rammed pit morphology (called the representative micro slopes) were identified, and ten zones where the representative micro slopes concentrate were selected as effective analysis domains. Furthermore, within effective analysis domains, the contour lines were generated to show the outline features of rammed pits, and the values of micro-slope heights, angles, plan curvatures and profile curvatures were statistically analyzed to reveal the surface features of rammed pits. Moreover, the distribution features of rammed pits were exhibited by their centroid positions, which can be calculated by the corresponding contour line shapes. Ultimately, this study indicates that rammed pits of the Ming Great Wall show more regularity than randomness in terms of geometric shapes and spatial distribution. Concretely, the outlines of most rammed pits approximate the circular or elliptical shapes. All the rammed pit surfaces are rough rather than smooth, and most of them can be mathematically expressed by quadratic polynomial equations. As for the distribution features, rammed pits are overall distributed in the triangular shapes, and distances between the equivalent centroids of adjacent rammed pits range from 8.95 cm to 17.86 cm. These findings prove that standardized ramming technique was applied in the Ming dynasty, resulting in high-quality construction of the Great Wall. Meanwhile, the rammers used to compact earthen materials possess rounded heads. However, the imperfect polishing of rammers and the inevitable operational errors could also lead to slight spatial randomness of rammed pits.& COPY; 2023 Consiglio Nazionale delle Ricerche (CNR). Published by Elsevier Masson SAS. All rights reserved.

Research on Calculation of Porosity of Rammed Soil in Pingyao City wall (China) Based on Scanning Electron Microscope Images

Quantitative Analysis of Soft Clay Three-dimensional Porosity Based on SEM Image Information

SOFT SOIL THREE-DIMENSIONAL POROSITY CALCULATED BASE ON SEM IMAGE AND ITS INFLUENCE FACTORS ANALYSIS

A Calculation Theory of Earth Pressure Considering Microstructure of Porous Materials

Experimental Study on Clay Pore Microstructure Based on SEM and IPP

Quantification and Characterization of Microporosity by Image Processing, Geometric Measurement and Statistical Methods: Application on Sem Images of Clay Materials

A Calculation Theory of Earth Pressure Considering Soil Contact Area

Study on the Spatial Regularity of Rammed Pits of the Ming Great Wall Using 3D Scanning Technique and Random Forest Algorithm

Experimental Study of Cement Mortar-Steel Fiber Reinforced Rammed Earth Wall

An Improved Quantification Method for Characterisation of Clay Microstructure Using SEM

Characterization on Flaking of Rammed Earthen Sites Using SMO Algorithm and Surface Topography Analysis: A Case Study of Jiaohe Ruins

3D scanning-based morphological characterization of rammed layer interfaces: a case study of the Ming Great Wall in northwestern China

Study on the Characterization of Differential Weathering Feature Based on Surface Roughness Theory and 3D Laser Scanning: A Case Study of the Suoyang Ancient City

3D Visualization and Porosity Computation of Clay Soil SEM Image by GIS

Surface Treatment of Rammed Earth Heritage Sites Using MICP Technology: An Investigation of Rainwater Erosion Resistance via Indoor Experiments and In Situ Testing

Micromechanical Investigation of Suffusion and Its Consequence in Gap-Graded Granular Soil at the Opening of Underground Structures Using the Coupled CFD-DEM Method

Experimental test and mechanism analysis of soil crust erosion resistance of rammed earth Great Wall in rainy season

Investigation of porosity variation on water retention behaviour of unsaturated granular media by using pore scale Micro-CT and lattice Boltzmann method

Quantitative Two/three-Dimensional Spatial Characterization and Fluid Transport Prediction of Macro/micropores in Gaomiaozi Bentonite

Using micro focus industrial computed tomography to characterize the effects of soil type and soil depth on soil pore characteristics, morphology, and soil compression in Xi’an, China

Analysis of the pore network structure of microbial solidification of construction residue soil based on CT scanning