Abstract:A new solid polymer electrolyte based on poly(vinylidene fluoride)‐hexafluoropropylene, with methoxypoly(ethylene glycol) chain‐decorated MXene flakes as inorganic fillers, and succinonitrile as an additive is prepared. The batteries assembled with this solid polymer electrolyte show excellent performance and stability. Solid polymer electrolytes (SPEs) offer inherent advantages for battery applications, such as high safety and excellent processability, but their practical use is limited by challenges like low ionic conductivity, subpar mechanical properties, and instability of the electrode/electrolyte interface. Here, novel SPEs are developed by embedding 2D MXenes decorated at the surface with methoxypolyethylene glycol chains into poly(vinylidene fluoride)‐hexafluoropropylene matrices, enhanced with succinonitrile as a plasticizer. This innovative design improves the compatibility of the modified MXene in poly(vinylidene fluoride)‐hexafluoropropylene and, together with the synergistic effects of succinonitrile, promotes the dissociation of lithium salt. The SPE achieves ionic conductivity of 1.49 × 10−4 S cm−1 at 30 °C, and a Li‐ion transference number of 0.59. These results are supported by comprehensive experimental characterization, COMSOL simulations, and DFT calculations. This SPE enables stable and reversible Li plating/stripping for over 2100 h in Li/Li symmetric cells, while fabricated Li/LiFePO4 full cells deliver a notable capacity of 135.4 mAh g−1 with an average Coulombic efficiency of 98.9% after 100 cycles at 0.2 C. Furthermore, the Li/LiNi0.6Co0.2Mn0.2O2 full cells also demonstrate a capacity of 140.5 mAh g−1 after over 200 cycles at 0.5 C, showcasing an impressive capacity retention rate of 99.6%.

Stable Cycling of All-Solid-State Lithium Batteries Enabled by Cyano-Molecular Diamond Improved Polymer Electrolytes

Stable Interface Chemistry and Multiple Ion Transport of Composite Electrolyte Contribute to Ultra‐long Cycling Solid‐State LiNi <sub>0.8</sub> Co <sub>0.1</sub> Mn <sub>0.1</sub> O <sub>2</sub> /Lithium Metal Batteries

Stable Interface Chemistry and Multiple Ion Transport of Composite Electrolyte Contribute to Ultra-long Cycling Solid-State LiNi<sub>0.8</sub>Co<sub>0.1</sub>Mn<sub>0.1</sub>O<sub>2</sub>/Lithium Metal Batteries

High voltage stable cycling of all-solid-state lithium metal batteries enabled by top-down direct fluorinated poly (ethylene oxide)-based electrolytes

Opening and Constructing Stable Lithium-ion Channels within Polymer Electrolytes

Stable Cycling of All‐Solid‐State Lithium Metal Batteries Enabled by Salt Engineering of PEO‐based Polymer Electrolytes

In-Situ Polymerized High-Voltage Solid-State Lithium Metal Batteries with Dual-Reinforced Stable Interfaces

Effect of Nano Al2O3 Addition on Cycling Performance of Poly(ether Block Amide) Based Solid-State Lithium Metal Batteries

Single Lithium-Ion Conducting Solid Polymer Electrolyte with Superior Electrochemical Stability and Interfacial Compatibility for Solid-State Lithium Metal Batteries

Asymmetric Trihalogenated Aromatic Lithium Salt Induced Lithium Halide Rich Interface for Stable Cycling of All-Solid-State Lithium Batteries

Durable and Adjustable Interfacial Engineering of Polymeric Electrolytes for Both Stable Ni-Rich Cathodes and High-Energy Metal Anodes

Improving Cyclability of All‐Solid‐State Batteries via Stabilized Electrolyte–Electrode Interface with Additive in Poly(propylene carbonate) Based Solid Electrolyte

MXene Surface Engineering Enabling High‐Performance Solid‐State Lithium Metal Batteries

Spontaneous in Situ Surface Alloying of Li-Zn Derived from a Novel Zn2+-Containing Solid Polymer Electrolyte for Steady Cycling of Li Metal Battery

In Situ Construction of Li3N-enriched Interface Enabling Ultra-Stable Solid-State LiNi0.8Co0.1Mn0.1O2/lithium Metal Batteries

Mechanism of Bilayer Polymer-Based Electrolyte with Functional Molecules in Enhancing the Capacity and Cycling Stability of High-Voltage Lithium Batteries

Chemo-mechanical stable cathode interphase via interface in-situ catalytic-conversion integrated design for all solid-state batteries

Solid‐State Lithium Metal Batteries with Extended Cycling Enabled by Dynamic Adaptive Solid‐State Interfaces

Polyacrylonitrile Fibers Network Reinforced Polymer Electrolyte with Li-Sn Alloy Layer Protected Li Anode Toward Ultra-Long Cycle Lifespan for Room-Temperature Solid-State Batteries

Solid-State Lithium Batteries with In Situ Polymerized Acrylate-Based Electrolytes Capable of Electrochemically Stable Operation at 100 °C

Solid Polymer Electrolytes Regulated by Ion-Dipole Interactions for High Voltage Lithium Batteries