Abstract:The application of surface heat reflective coatings is one of the effective measures to solve the temperature disease of concrete structures in sunlit environments. To achieve strong bonding, high durability, and good cooling characteristics, a novel inorganic reflective thermal insulation coating was prepared using magnesium phosphate cement (MPC) as the binder and reflective matrix, and titanium dioxide and glass beads as the reflective thermal insulation reinforcement functional additives. The optimum ratio of the new reflective thermal insulation coating was preferred through laboratory irradiation test, thermal conductivity test, and spectral reflectance test. The results show that MPC itself was a good reflection cooling material, and the surface and internal temperatures of concrete blocks were reduced by 7.6 °C and 6.6 °C, respectively, after using MPC as the cooling coating. When 2% titanium dioxide was added to MPC, the surface and internal temperatures were further reduced by 6.0 °C and 4.9 °C, respectively. On top of this, the surface and internal temperatures of the concrete were reduced by a further 3.9 °C and 2.2 °C when 8% glass beads were added. The bond strength of the MPCTG coating to the concrete matrix reached 2.1 MPa. Finally, the microscopic characteristics and the reflective thermal insulation mechanism of the MPCTG coating were investigated with the aid of SEM, thermo gravimetric analysis, and XRD analysis. The results show that the MPC in the MPCTG coating was well hydrated, and a large number of hydration products encapsulated the unreacted MgO particles, titanium dioxide, and glass beads, forming a dense whole with high reflection and low thermal conductivity, and the coating effectively prevented the entry of radiant heat. At the same time, the MPCTG coating was thermally stable below 70 °C. The magnesium phosphate cement-based reflective thermal insulation coating developed in this study has potential application prospects in concrete structure cooling coatings.

Development of red mud-modified geopolymer coating with radiative cooling effect for footway application

Phosphate activated geopolymer-based coating with high temperature resistance for sub-ambient radiative cooling

Development of Super Road Heat-Reflective Coating and Its Field Application

A novel functional coating with 2DMts/SA phase change material as filler and its pavement temperature regulation performance

Reflective Coatings for High Albedo Pavement

Synergistic effect of silica aerogel and titanium dioxide in porous polyurethane composite coating with enhanced passive radiative cooling performance

Utilization of Basic Oxygen Furnace Slag in Geopolymeric Coating for Passive Radiative Cooling Application

Development of two-dimensional nano Mts/SA phase change materials for self-adjusting temperature of pavement

Laboratorial Investigation on Optical, Thermal and Pavement Performance of Biomimetic Dark Reflective Coatings with Composite Structure for Pavement Cooling

Design and Experimental Evaluation of Composite Magnesium Phosphate Cement-Based Coating with High Cooling Effect

Waterborne coatings with sub-ambient cooling under direct sunlight–part I: Optical properties and cooling effect measurements

Development of Microparticle Implanted PVDF-HF Polymer Coating on Building Material for Daytime Radiative Cooling

Experimental investigation on performance of composite thermochromic and ice-melting coatings for dynamic pavement temperature control

Cost-effective pearlescent pigments with high near-infrared reflectance and outstanding energy-saving ability for mitigating urban heat island effect

Colored Radiative Cooling and Flame-Retardant Polyurethane-Based Coatings: Selective Absorption/Reflection in Solar Waveband

Colorful, eco-friendly and scalable passive radiative cooling coatings integrating thermal insulation and self-cleaning properties

Enhanced passive radiative cooling coating with Y2O3 for thermal management of building

Optical and Durability Performance of Near-Infrared Reflective Coatings for Cool Pavement: Laboratorial Investigation

Improved Abrasion-Resistant Coatings Using Designed Inorganic Particles for Durable Radiative Cooling

Scalable, Controlled Bimodal Pore-Structured Polymer Coating for Efficient Passive Daytime Radiative Cooling