Abstract:Methane dry reforming, co-converting greenhouse gases CH4 and CO2 into chemically active syngas (H2/CO), affords a promising route for producing chemicals and fuels from carbon resources. Ni catalysts are the most active for this reaction but suffer from the dilemma of rapid deactivation caused by metal sintering at higher temperatures (>973 K) or coke accumulation at relatively lower temperatures (673–973 K). Here, we report a catalyst configuration—Ni particles (15 nm) confined by a 1–2 nm-thick multielement-oxide (MEO) layer—allows a stable operation at 873–1073 K with a stoichiometric CH4/CO2 ratio of 1.0, that is, the severe conditions for catalyst deactivation but of industrial interest for process efficiency and atomic economy. The in situ-evolved MEO layer resembles the property of high-entropy oxide, which stabilizes the Ni particles with appropriate size and high-index facets, even at 1173 K. Meanwhile, in situ TEM under near atmospheric pressure combining intelligent gravity analysis (IGA)-mass spectrometry (MS) characterizations prove that this unique structure balanced the activation of CH4 and CO2. Thus, the lifetime of the catalyst has been efficiently prolonged with nearly coke-free operations, even at 873 K, the most severe coking temperature. This high-entropy design and stabilization effect offers a facile strategy to precisely fabricate active and robust metal catalysts with wide operation temperatures for many challenging reactions.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acscatal.1c02995.Structural characterizations, in situ experiments, and the comparison of catalytic performances under MDR reactions conditions of OxNi and the reference Ni catalysts (PDF)In situ TEM observations for the OxNi catalyst carried out over ARM 300F using an insitu sample holder (MP4)In situ TEM observations for the OxNi catalyst carried out at 1173 K with the pressure of 760 mbar (MP4)In situ TEM observations for the reference Ni catalyst carried out at 1173 K with the pressure of 760 mbar in a CH4 atmosphere (MP4)This article has not yet been cited by other publications.

Immobilization of Ni on MOF-derived CeO 2 for promoting low-temperature dry reforming of methane

Insights into Nickel-Based Dual Function Materials for CO2 Sorption and Methanation: Effect of Reduction Temperature

Ni/CeO2 Catalyst Prepared via Microimpinging Stream Reactor with High Catalytic Performance for CO2 Dry Reforming Methane

Improving Catalytic Stability and Coke Resistance of Ni/Al2O3 Catalysts with Ce Promoter for Relatively Low Temperature Dry Reforming of Methane Reaction

Dry reforming of methane using cordierite monoliths with immobilized Ni–Ce catalysts

Preparing a Zr-Doped CeO 2 Nanorod to Improve the Catalytic Performance of the Ni-Based Catalyst for Dry Reforming of Methane by Enhancing Oxygen Supply

Co–Ni Alloy Supported on CeO2 As a Bimetallic Catalyst for Dry Reforming of Methane

Lamellar cross-linking Ni/CeO 2 as an efficient and durable catalyst for dry reforming of methane

CeO2 nanorod@NiPhy core‐shell catalyst for methane dry reforming: effect of simultaneous sintering prevention of CeO2 support and active Ni

Ni-CeO2/SBA-15 Catalyst Prepared by Glycine-Assisted Impregnation Method for Low-Temperature Dry Reforming of Methane

Highly dispersed Ni/MgO-mSiO2 catalysts with excellent activity and stability for dry reforming of methane

Improving the anti-coking ability in the Ni-M(M = Ce, Zr, Co)@SiO 2 yolk-shell catalysts for dry reforming of methane

Enhanced activity and stability of Ce-doped PrCrO3-supported nickel catalyst for dry reforming of methane

Self-Confinement Created for a Uniform Ir–Ni/SiO2 Catalyst with Enhanced Performances on CO2 Reforming of Methane

Modulating Proportion of Ni0 Species Stabilized by Ni2+ on Ni-MgO Catalyst with Superior Stability for Dry Reforming of Methane

Light-Reinforced Key Intermediate for Anticoking to Boost Highly Durable Methane Dry Reforming over Single Atom Ni Active Sites on CeO2.

Engineering of Surface Properties of Ni-CeZrAl Catalysts for Dry Reforming of Methane

Synergy of Oxygen Vacancies and Ni 0 Species to Promote the Stability of a Ni/ZrO 2 Catalyst for Dry Reforming of Methane at Low Temperatures

Ni/Ce0.9Eu0.1O1.95 with enhanced coke resistance for dry reforming of methane

Robust and Coke-free Ni Catalyst Stabilized by 1–2 nm-Thick Multielement Oxide for Methane Dry Reforming

Highly Efficient and Stable Methane Dry Reforming Enabled by a Single-Site Cationic Ni Catalyst