Abstract:Multi-energy field composite reinforcement technology has become a critical technique for improving the service life of key components in aviation engines. This paper aims to investigate the strengthening mechanism of high-speed cutting and solid particle-entrained waterjet peening (HSC-WJP) composite reinforcement on 7075-T6 aluminum alloy. Samples subjected to single solid particle-entrained waterjet peening (WJP) reinforcement were selected as the control group. The surface quality and microstructure evolution of 7075-T6 aluminum alloy after composite reinforcement were examined using SEM, EDS, XRD, TEM, and HRTEM techniques. The research results indicate that, under the same jet parameters, HSC-WJP composite reinforcement is superior to single WJP reinforcement in terms of surface roughness, except when the jet pressure is below 25 MPa and the track spacing is 0.53. The surfaces of the 7075-T6 aluminum alloy workpieces after reinforcement are mainly characterized by the presence of pits and micro-pores. Surface roughness shows a positive correlation with jet pressure and nozzle traverse speed. After HSC-WJP composite reinforcement, the surface roughness decreases by 0.132 μm compared to single WJP reinforcement, and the size of surface pits is reduced by 4–20 μm. Surface roughness decreases first, then increases, and then decreases again with increasing target distance, while it increases first and then decreases with increasing path spacing. A significant precipitation-free zone (PFZ) is present in the 7075-T6 aluminum alloy after reinforcement, and its width is positively correlated with the nozzle traverse speed. When the nozzle traverse speed is 120 mm/min, the average size of the PFZ at grain boundaries after single WJP reinforcement is 12–20 nm, while it decreases by approximately 3 nm after HSC-WJP composite reinforcement. The main precipitate phase in the reinforced aluminum matrix is η′ phase, and under the same jet parameters, the HSC-WJP grain size is smaller, approximately 25–34 nm, and exhibits significant dislocation walls and dislocation tangles, with a higher dislocation density compared to single WJP reinforcement.

Research on the mechanisms of reinforcing particles on the laser shock peening induced residual stress in aluminum-based composite materials

Laser Shock Peening of SiCp/2009Al Composites: Microstructural Evolution, Residual Stress and Fatigue Behavior

On the Microstructure, Residual Stress and Fatigue Performance of Laser Metal Deposited TC17 Alloy Subjected to Laser Shock Peening

Laser shock peening regulating aluminum alloy surface residual stresses for enhancing the mechanical properties: Roles of shock number and energy

Unraveling Residual Stress Distribution Characteristics of 6061-T6 Aluminum Alloy Induced by Laser Shock Peening

Microstructure and residual stress modulation of 7075 aluminum alloy for improving fatigue performance by laser shock peening

Laser shock peening induced mechanical properties enhancement of 50CrVA alloy

Laser shock peened Ti-6Al-4 V alloy: Experiments and modeling

The effect of laser shock peening on surface integrity and high and very high cycle fatigue properties of 2024-T351 aluminum alloy

Microstructural evolution and mechanical behaviors of Al-Cu-Li alloy processed by laser shock peening

High-performance integrated additive manufacturing with laser shock peening –induced microstructural evolution and improvement in mechanical properties of Ti6Al4V alloy components

Laser Shock Peening of Ti6Al4V Alloy with Combined Nanosecond and Femtosecond Laser Pulses

Mechanical properties and strengthening mechanisms of Ti-6Al-4V treated by electro-pulsing assisted laser shock peening

Optimization Of Residual Stresses Induced By Multiple Laser Shock Processing

Study on multi-field composite strengthening, surface integrity, and microstructural evolution mechanism of 7075-T6 aluminum alloy

Recent Developments and Novel Applications of Laser Shock Peening: A Review

Achieving high strength and ductility in selective laser melting Ti-6Al-4V alloy by laser shock peening

Effect of laser shock peening on the high-temperature fatigue performance of 7075 aluminum alloy

Experimental and Numerical Studies of Fatigue Behavior of Ti6Al4V Alloy Treated by Laser Shock Peening

Relationship between Stress State and Microstructure of 7B04 Aluminum Alloy Surface Fatigue Properties by Laser Shock Peening Improvement

Effects of Laser Shock Peening on Interfacial Bonding Strength of Cold-Sprayed Coating